B–63325EN/03
3. DATA INPUT/OUTPUT
239
Method 2 (the output file name is specified)
(1)Click the [PUNCH] soft key.
(2)Click the [”FILE NAME] soft key.
(3)Key in the file name.
(4)Click the [FILE NAME”] soft key.
(5)Click the [COMMONNONVOL] soft key.
Method 3 (the file number is specified, one of three methods)
(1)Click the [PUNCH] soft key.
(2)Click the [(FILE#)] soft key.
(3)Key in the file number.
(4)Click the [COMMONNONVOL] soft key.
Method 4 (the file number is specified, one of three methods)
(1)Click the [PUNCH] soft key.
(2)Click the
N
address key.
(3)Key in the file number.
(4)Click the [COMMONNONVOL] soft key.
Method 5 (the file number is specified, one of three methods)
(1)Click the
N
address key.
(2)Key in the file number.
(3)Click the [PUNCH] soft key.
NOTE
When method 1 (in which neither the output file name nor
number need be specified), described in “Output of custom
macro variables,” is used to output custom macro variables
to a FANUC Handy File and Memory card, the file name will
be MACRO.TXT.
(1)Enter EDIT mode.
(2)Follow either of the procedures described below to display the
volumetric compensation data screen:
Method 1
Press the
SYSTEM
function key several times, until the volumetric
compensation screen appears.
Method 2
(1)Press the
SYSTEM
function key.
(2)Click the [VOLUMETRIC] soft key.
3.2.7
Output of Volumetric
Compensation Data
Setup for output