1. Fanuc
  2. FANUC Open CNC Setup procedure for Windows 95/NT4.0

FANUC Open CNC Setup procedure for Windows 95/NT4.0 Additional Manual Page 1

Additional Manual
Edit Date Desig. Description
Title
Draw. No.
FANUC Open CNC
Setup procedure for Windows95/NT4.0
A-63707E
FANUC LTD
Sheet
1/12
Cust.
01 980908 Kayano New registration
04
000217
Kayano
A
ll pages modified
1.
1.1.
1. Overview
OverviewOverview
Overview
When Microsoft’s operating system, Windows 95(both Japanese and English version) and
Windows NT Workstation 4.0(both Japanese and English version), are ordered as the OS for
the personal computer(PC) module of PC-integrated i-Series and Intelligent Terminal Type 2 of
FANUC Open CNC, these OSs are shipped in the form of CD-ROM from FANUC.
It is necessary to configure the PC module so that it can use the CD-ROM drive by purchasing
the proper hardware and software from the PC market when the installation of the additional
software drivers or re-installation of the OS itself is required, because the PC module of the
Open CNC does not have the CD-ROM drive.
This manual describes the handling of the CD-ROM drive using the PCMCIA card socket and
the installation procedure of the Open CNC drivers at Windows 95 and Windows NT 4.0.
2.
2.2.
2. Windows 95(Japanese/English version)
Windows 95(Japanese/English version)Windows 95(Japanese/English version)
Windows 95(Japanese/English version)
FANUC shipped Windows 95(Japanese/English version) with the OS backup medium in the
form of FLOPPY DISK until the following changing date. But the order number for Windows
95 has been changed because the OS backup medium is changed from FLOPPY DISK to CD-
ROM. So, old order number cannot be used for the new ordering specification.
Name New order number Old order number Changing date
Windows 95(Japanese) A02B-0207-J540#JP A02B-0207-J510#JP February, 2000
Windows 95(English) A02B-0207-J540#EN A02B-0207-J510#EN April, 1998
2.1.
2.1.2.1.
2.1. Re-installation of OS
Re-installation of OSRe-installation of OS
Re-installation of OS
FANUC ships the CD-ROM and one Setup Boot Disk as the OS media for PC-integrated i-
Series and Intelligent Terminal Type 2 of Open CNC(hereafter, "Device"). When you re-install
Windows 95 to the hard disk, you will use this Setup Boot Disk in order to boot the OS and let
the OS recognize the CD-ROM drive. At this time, PCMCIA SCSI card and CD-ROM drive
having the SCSI interface are required as the hardware, and moreover, PCMCIA card service
and SCSI card driver are also required as the software. However,
However, However,
However, these software are not
these software are notthese software are not
these software are not
included in the Setup Boot Disk shipped from FANUC.
included in the Setup Boot Disk shipped from FANUC.included in the Setup Boot Disk shipped from FANUC.
included in the Setup Boot Disk shipped from FANUC.
There are several types of PCMCIA SCSI cards, CD-ROM drives having the SCSI interface,
PCMCIA card services in the PC market, FANUC has checked the usage of the following
items.
a. PCMCIA SCSI card
Adaptec APA-1460x SlimSCSI
(In order to connect the one of the following CD-ROM drives, the special cable is
required. The ordering No. of Adaptec is ACK/ASI-H.)
b. Portable CD-ROM drive (SCSI interface)
Panasonic KXL-810AN
PIONEER PCP-PR24W
FANUC Open CNC
FANUC Open CNCFANUC Open CNC
FANUC Open CNC
Setup procedure for Windows 95/NT 4.0
Setup procedure for Windows 95/NT 4.0Setup procedure for Windows 95/NT 4.0
Setup procedure for Windows 95/NT 4.0
Previous page
Next page

Contents Summary of FANUC Open CNC Setup procedure for Windows 95/NT4.0 Additional Manual

  • Page 1FANUC Open CNC Setup procedure for Windows 95/NT 4.0 1. Overview When Microsoft’s operating system, Windows 95(both Japanese and English version) and Windows NT Workstation 4.0(both Japanese and English version), are ordered as the OS for the personal computer(PC) module of PC-integrated i-Series an
  • Page 2I-O DATA CDPS-PX24/PCSC c. PCMCIA card service IBM PlayAtWill Version 3.0 or later We are sorry to trouble you, but please purchase SlimSCSI, the CD-ROM drive, and PlayAtWill, separately. And please make up the Setup Boot Disk according to the instructions described in the text file, Readme.txt, Rea
  • Page 36. Insert 2nd "Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207-K792#ZZ07- 2)" into floppy drive and enter “a:\hssb\win95 a:\hssb\win95” a:\hssb\win95 onto the [Copy Manufacturer's files from:] field. Then click [OK] button. 7. In case of A02B-0207-K791 Edition 01.1 and 01.2, confirm that "H
  • Page 44. In case that the PC module is for the T type of 160/180/210, 160i/180i/210i (including the multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows 95. Double-click the [MDI] icon and select the proper item on the [MDI Keyboard type:] according to the system to be connecte
  • Page 5Close [Control Panel]. 7. Click the [Start] button on the task bar of Windows 95 and then click [Shut down...]. Select "Shut down the computer?" and click [Yes] button. When the following message is displayed on the screen, remove floppy disk from the floppy drive and press Ctrl+Alt+Delete keys simu
  • Page 63. Windows NT Workstation 4.0 (Japanese/English version) 3.1. Re-installation of OS In case of Windows NT 4.0, FANUC ships the CD-ROM and three Setup Disks as the OS media for PC-integrated i-Series and Intelligent Terminal Type 2 of Open CNC(hereafter, "Device"). When you re-install Windows NT to t
  • Page 72. Right-click on the desktop field of Windows NT to open the menu. Select [Properties] from that menu to invoke [Display Properties] window. Click [Settings] tab. 3. Click [Display Type...] button and click [Change...] button. 4. Click [Have Disk…] button. Insert the first "Open CNC Drivers Disk(A0
  • Page 87. Remove the floppy disk from the floppy drive. When the following message is displayed on the screen, click [Yes] button. “Do you want to restart your computer now?” C. Calibration of touch panel 1. When Windows NT comes up, logon as the Administrator. Insert the first “Open CNC Drivers Disk” into
  • Page 94. Insert the second “Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207- K792#ZZ07-2)” into the floppy drive. 5. Click “3 1/2 Floppy (A:)” at [All Folders] and double-click “Hssb” at [Contents of ‘3 1/2 Floppy (A:)’]. Then double-click “Nt40” at [Contents of ‘Hssb’]. 6. Right-click hssb(hssb.
  • Page 10button. “Do you want to restart your computer now?” 8. In case that the Device is for the T type of 160/180/210, 160i/180i/210i (including the multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows NT. Double-click the [MDI] icon and select the proper item on the [MDI Keybo
  • Page 111. Logon to Windows NT as the Administrator. 2. Open [Control Panel] and double-click the [SCSI Adapters] icon 3. Click [Drivers] tab at [SCSI Adapters] dialog box. 4. Click [Add…] button. 5. Click Adaptec at [Manufacturers:] and select “Adaptec SlimSCSI 16-Bit PCMCIA SCSI Host Adapter” and click [O
  • Page 12and save it as the file name, PCMCIA.REG under a proper folder, e.g. C:\MMC. REGEDIT4 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atdisk] "Start"=dword:00000001 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Pcmcia] "InterruptMask"=dword:00000200 3. Open [Windows NT Explorer] and op