1. Fanuc
  2. FANUC Open CNC Setup procedure for Windows 95/NT4.0

FANUC Open CNC Setup procedure for Windows 95/NT4.0 Additional Manual Page 2

Additional Manual
Edit Date Desig. Description
Title
Draw. No.
FANUC Open CNC
Setup procedure for Windows95/NT4.0
A-63707E
FANUC LTD
Sheet
2/12
Cust.
01 980908 Kayano New registration
04
000217
Kayano
A
ll pages modified
I-O DATA CDPS-PX24/PCSC
c. PCMCIA card service
IBM PlayAtWill Version 3.0 or later
We are sorry to trouble you, but please purchase SlimSCSI, the CD-ROM drive, and
PlayAtWill, separately. And please make up the Setup Boot Disk according to the instructions
described in the text file, Readme.txt
Readme.txtReadme.txt
Readme.txt, stored in the same Setup Boot Disk. Then use it for the
OS boot-up and re-installation of the OS.
2.2 Driver installation
2.2 Driver installation2.2 Driver installation
2.2 Driver installation
After installing Windows 95 to the PC module of the Open CNC using the above-mentioned
Setup Boot Disk, install the various drivers of the Open CNC. These drivers are stored in the
“Open CNC Drivers Disk (A02B-0207-K791 Ed. 01.1 or later, or A02B-0207-K792 Ed. 01.0 or
later)”.
In this section, the procedures for installing the following drivers are described.
1 High Speed Serial Bus(HSSB) driver
2 MDI key driver
3 Display driver
4 Touch panel driver
As for the MDI key driver and the Touch panel driver, install each driver only in case your
Open CNC system is configured with MDI key or Touch panel.
A. High Speed Serial
A. High Speed Serial A. High Speed Serial
A. High Speed Serial Bus(HSSB) driver installation
Bus(HSSB) driver installationBus(HSSB) driver installation
Bus(HSSB) driver installation
1. Click the [Start] button on the task bar of Windows 95 and then click [Settings] – [Control
Panel].
2. Double-click the [Add New Hardware] icon to invoke the [Add New Hardware Wizard]
window. Click [Next>] button.
3. When the question, "Do you want Windows to search for your new hardware?" appears on
the screen, select [No] and click [Next>] button.
4. Select [Other Device] on the [Hardware Types:] field, then click [Next>] button.
5. Click [Have Disk...] button on [Manufacturers] – [Models] window.
In case of the PC module which has MMX-Pentium Card PC, when you re-install Windows
95, do not leave the settings as the default, but select the following settings.
1. Select “Custom
CustomCustom
Custom” at Setup Options
Setup OptionsSetup Options
Setup Options screen of the Windows 95 Setup Wizard.
2. At Analyzing Your Computer
Analyzing Your ComputerAnalyzing Your Computer
Analyzing Your Computer screen of the same Wizard, select “No, I want to modify the
No, I want to modify theNo, I want to modify the
No, I want to modify the
hardware list.
hardware list.hardware list.
hardware list.” Then select Display
DisplayDisplay
Display in Hardware types:
Hardware types:Hardware types:
Hardware types: at the next screen and select
only the items listed below in Manufacturer and model:
Manufacturer and model:Manufacturer and model:
Manufacturer and model:
Default Standard VGA Display Adapter
Standard VGA Display Adapter
Trident VGA Display Adapter
Previous page
Next page

Contents Summary of FANUC Open CNC Setup procedure for Windows 95/NT4.0 Additional Manual

  • Page 1FANUC Open CNC Setup procedure for Windows 95/NT 4.0 1. Overview When Microsoft’s operating system, Windows 95(both Japanese and English version) and Windows NT Workstation 4.0(both Japanese and English version), are ordered as the OS for the personal computer(PC) module of PC-integrated i-Series an
  • Page 2I-O DATA CDPS-PX24/PCSC c. PCMCIA card service IBM PlayAtWill Version 3.0 or later We are sorry to trouble you, but please purchase SlimSCSI, the CD-ROM drive, and PlayAtWill, separately. And please make up the Setup Boot Disk according to the instructions described in the text file, Readme.txt, Rea
  • Page 36. Insert 2nd "Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207-K792#ZZ07- 2)" into floppy drive and enter “a:\hssb\win95 a:\hssb\win95” a:\hssb\win95 onto the [Copy Manufacturer's files from:] field. Then click [OK] button. 7. In case of A02B-0207-K791 Edition 01.1 and 01.2, confirm that "H
  • Page 44. In case that the PC module is for the T type of 160/180/210, 160i/180i/210i (including the multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows 95. Double-click the [MDI] icon and select the proper item on the [MDI Keyboard type:] according to the system to be connecte
  • Page 5Close [Control Panel]. 7. Click the [Start] button on the task bar of Windows 95 and then click [Shut down...]. Select "Shut down the computer?" and click [Yes] button. When the following message is displayed on the screen, remove floppy disk from the floppy drive and press Ctrl+Alt+Delete keys simu
  • Page 63. Windows NT Workstation 4.0 (Japanese/English version) 3.1. Re-installation of OS In case of Windows NT 4.0, FANUC ships the CD-ROM and three Setup Disks as the OS media for PC-integrated i-Series and Intelligent Terminal Type 2 of Open CNC(hereafter, "Device"). When you re-install Windows NT to t
  • Page 72. Right-click on the desktop field of Windows NT to open the menu. Select [Properties] from that menu to invoke [Display Properties] window. Click [Settings] tab. 3. Click [Display Type...] button and click [Change...] button. 4. Click [Have Disk…] button. Insert the first "Open CNC Drivers Disk(A0
  • Page 87. Remove the floppy disk from the floppy drive. When the following message is displayed on the screen, click [Yes] button. “Do you want to restart your computer now?” C. Calibration of touch panel 1. When Windows NT comes up, logon as the Administrator. Insert the first “Open CNC Drivers Disk” into
  • Page 94. Insert the second “Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207- K792#ZZ07-2)” into the floppy drive. 5. Click “3 1/2 Floppy (A:)” at [All Folders] and double-click “Hssb” at [Contents of ‘3 1/2 Floppy (A:)’]. Then double-click “Nt40” at [Contents of ‘Hssb’]. 6. Right-click hssb(hssb.
  • Page 10button. “Do you want to restart your computer now?” 8. In case that the Device is for the T type of 160/180/210, 160i/180i/210i (including the multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows NT. Double-click the [MDI] icon and select the proper item on the [MDI Keybo
  • Page 111. Logon to Windows NT as the Administrator. 2. Open [Control Panel] and double-click the [SCSI Adapters] icon 3. Click [Drivers] tab at [SCSI Adapters] dialog box. 4. Click [Add…] button. 5. Click Adaptec at [Manufacturers:] and select “Adaptec SlimSCSI 16-Bit PCMCIA SCSI Host Adapter” and click [O
  • Page 12and save it as the file name, PCMCIA.REG under a proper folder, e.g. C:\MMC. REGEDIT4 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atdisk] "Start"=dword:00000001 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Pcmcia] "InterruptMask"=dword:00000200 3. Open [Windows NT Explorer] and op