1. Fanuc
  2. FANUC Open CNC Setup procedure for Windows 95/NT4.0

FANUC Open CNC Setup procedure for Windows 95/NT4.0 Additional Manual Page 10

Additional Manual
Edit Date Desig. Description
Title
Draw. No.
FANUC Open CNC
Setup procedure for Windows95/NT4.0
A-63707E
FANUC LTD
Sheet
10/12
Cust.
01 980908 Kayano New registration
04
000217
Kayano
A
ll pages modified
button.
“Do you want to restart your computer now?”
8. In case that the Device is for the T type of 160/180/210, 160i/180i/210i (including the
multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows NT.
Double-click the [MDI] icon and select the proper item on the [MDI Keyboard type:]
according to the system to be connected, then click [OK] button. Close [Control Panel].
It is not possible to input from MDI keyboard in the screen before the start of Windows NT,
such as the Boot selection screen. So, we recommend you to shorten the waiting time at the
Boot selection screen.
1. Open [Control Panel].
2. Double-click the [System] icon.
3. Click [Startup/Shutdown] tab.
4. Set the Boot selection time for about 5 seconds on the [Show list for] in the [System
Startup] area.
5. Click [OK] button.
3.3 PCMCIA SCSI card
3.3 PCMCIA SCSI card3.3 PCMCIA SCSI card
3.3 PCMCIA SCSI card
A.
A.A.
A. Deletion of SCSI driver
Deletion of SCSI driverDeletion of SCSI driver
Deletion of SCSI driver
In order to install Windows NT 4.0 onto the Device, Adaptec SlimSCSI is connected to the
PCMCIA slot, but when you remove only the SCSI card, an error message will appear at the
next logon to Windows NT. So you should do the following steps to delete the SCSI driver
when the CD-ROM drive is no more needed.
1. After turning off the power of the Device, remove the SCSI card from the PCMCIA card
slot of the Device.
2. Turn on the Device and logon to Windows NT as the Administrator.
3. When logon to Windows NT, an error message will appear on [Service Control Manager]
dialog box. Click [OK] button.
4. Open [Control Panel] and double-click the [SCSI Adapters] icon
5. Click [Drivers] tab at [SCSI Adapters] dialog box.
6. Select “Adaptec AHA-151x/AHA-152x or AIC-6260/AIC-636… (Not Started)” and click
[Remove] button.
7. When the following message is displayed on the screen, click [Yes] button.
“Are you sure you want to remove this driver?”
8. Click [OK] button at [SCSI Adapters] dialog box. Close [Control Panel].
B.
B.B.
B. Re-installation of SCSI driver
Re-installation of SCSI driverRe-installation of SCSI driver
Re-installation of SCSI driver
In order to use the PCMCIA SCSI card at Windows NT again, turn off the power of the
Device and connect the SCSI card to the PCMCIA slot, then turn on the power. Do the
following steps.
Previous page
Next page

Contents Summary of FANUC Open CNC Setup procedure for Windows 95/NT4.0 Additional Manual

  • Page 1FANUC Open CNC Setup procedure for Windows 95/NT 4.0 1. Overview When Microsoft’s operating system, Windows 95(both Japanese and English version) and Windows NT Workstation 4.0(both Japanese and English version), are ordered as the OS for the personal computer(PC) module of PC-integrated i-Series an
  • Page 2I-O DATA CDPS-PX24/PCSC c. PCMCIA card service IBM PlayAtWill Version 3.0 or later We are sorry to trouble you, but please purchase SlimSCSI, the CD-ROM drive, and PlayAtWill, separately. And please make up the Setup Boot Disk according to the instructions described in the text file, Readme.txt, Rea
  • Page 36. Insert 2nd "Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207-K792#ZZ07- 2)" into floppy drive and enter “a:\hssb\win95 a:\hssb\win95” a:\hssb\win95 onto the [Copy Manufacturer's files from:] field. Then click [OK] button. 7. In case of A02B-0207-K791 Edition 01.1 and 01.2, confirm that "H
  • Page 44. In case that the PC module is for the T type of 160/180/210, 160i/180i/210i (including the multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows 95. Double-click the [MDI] icon and select the proper item on the [MDI Keyboard type:] according to the system to be connecte
  • Page 5Close [Control Panel]. 7. Click the [Start] button on the task bar of Windows 95 and then click [Shut down...]. Select "Shut down the computer?" and click [Yes] button. When the following message is displayed on the screen, remove floppy disk from the floppy drive and press Ctrl+Alt+Delete keys simu
  • Page 63. Windows NT Workstation 4.0 (Japanese/English version) 3.1. Re-installation of OS In case of Windows NT 4.0, FANUC ships the CD-ROM and three Setup Disks as the OS media for PC-integrated i-Series and Intelligent Terminal Type 2 of Open CNC(hereafter, "Device"). When you re-install Windows NT to t
  • Page 72. Right-click on the desktop field of Windows NT to open the menu. Select [Properties] from that menu to invoke [Display Properties] window. Click [Settings] tab. 3. Click [Display Type...] button and click [Change...] button. 4. Click [Have Disk…] button. Insert the first "Open CNC Drivers Disk(A0
  • Page 87. Remove the floppy disk from the floppy drive. When the following message is displayed on the screen, click [Yes] button. “Do you want to restart your computer now?” C. Calibration of touch panel 1. When Windows NT comes up, logon as the Administrator. Insert the first “Open CNC Drivers Disk” into
  • Page 94. Insert the second “Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207- K792#ZZ07-2)” into the floppy drive. 5. Click “3 1/2 Floppy (A:)” at [All Folders] and double-click “Hssb” at [Contents of ‘3 1/2 Floppy (A:)’]. Then double-click “Nt40” at [Contents of ‘Hssb’]. 6. Right-click hssb(hssb.
  • Page 10button. “Do you want to restart your computer now?” 8. In case that the Device is for the T type of 160/180/210, 160i/180i/210i (including the multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows NT. Double-click the [MDI] icon and select the proper item on the [MDI Keybo
  • Page 111. Logon to Windows NT as the Administrator. 2. Open [Control Panel] and double-click the [SCSI Adapters] icon 3. Click [Drivers] tab at [SCSI Adapters] dialog box. 4. Click [Add…] button. 5. Click Adaptec at [Manufacturers:] and select “Adaptec SlimSCSI 16-Bit PCMCIA SCSI Host Adapter” and click [O
  • Page 12and save it as the file name, PCMCIA.REG under a proper folder, e.g. C:\MMC. REGEDIT4 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atdisk] "Start"=dword:00000001 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Pcmcia] "InterruptMask"=dword:00000200 3. Open [Windows NT Explorer] and op