1. Fanuc
  2. FANUC Open CNC Setup procedure for Windows 95/NT4.0

FANUC Open CNC Setup procedure for Windows 95/NT4.0 Additional Manual Page 6

Additional Manual
Edit Date Desig. Description
Title
Draw. No.
FANUC Open CNC
Setup procedure for Windows95/NT4.0
A-63707E
FANUC LTD
Sheet
6/12
Cust.
01 980908 Kayano New registration
04
000217
Kayano
A
ll pages modified
3.
3.3.
3. Windows NT Workstation 4.0 (Japanese/English version)
Windows NT Workstation 4.0 (Japanese/English version)Windows NT Workstation 4.0 (Japanese/English version)
Windows NT Workstation 4.0 (Japanese/English version)
3.1.
3.1.3.1.
3.1. Re-installation of OS
Re-installation of OSRe-installation of OS
Re-installation of OS
In case of Windows NT 4.0, FANUC ships the CD-ROM and three Setup Disks as the OS
media for PC-integrated i-Series and Intelligent Terminal Type 2 of Open CNC(hereafter,
"Device"). When you re-install Windows NT to the hard disk, you will use these Setup Disks in
order to boot the OS and let the OS recognize the CD-ROM drive. At this time, PCMCIA SCSI
card and CD-ROM drive having the SCSI interface are required as the hardware.
As for the hardware used at re-installation of Windows NT 4.0, FANUC has checked the
following items.
a. PCMCIA SCSI card
Adaptec APA-1460x SlimSCSI
(In order to connect the one of the following CD-ROM drives, the special cable is
required. The ordering No. of Adaptec is ACK/ASI-H.)
b. Portable CD-ROM drives (SCSI interface)
Panasonic KXL-810AN
PIONEER PCP-PR24W
I-O DATA CDPS-PX24/PCSC
After connecting these hardware properly to the PC module of the Open CNC, boot Windows
NT from the Setup Disks and install the OS.
3.2
3.23.2
3.2 Driver installation
Driver installationDriver installation
Driver installation
After installing Windows NT 4.0 to the PC module of the Open CNC using the Setup Disks,
install the various drivers of the Open CNC. These drivers are stored in the “Open CNC
Drivers Disk (A02B-0207-K791 Ed. 01.1 or later, or A02B-0207-K792 Ed. 01.0 or later)”.
In this section, the procedures for installing the following drivers are described.
1 Display driver
2 Touch panel driver
3 High Speed Serial Bus(HSSB) driver
4 MDI key driver
As for the Touch panel driver and the MDI key driver, install each driver only in case your
Open CNC system is configured with Touch panel or MDI key.
You must install these drivers in the above order.
You must install these drivers in the above order.You must install these drivers in the above order.
You must install these drivers in the above order. Especially for the Open CNC system which
has both Touch panel and MDI key, you must install the Touch panel driver first, and then
install the MDI key driver. Otherwise, the restoration setup by Windows NT Setup Disk will
be required.
In order to install these drivers, you must have the Administrator privilege. Please logon to
Windows NT as the Administrator.
A.
A.A.
A. Display driver installation
Display driver installationDisplay driver installation
Display driver installation
1. Logon to Windows NT as the Administrator.
Previous page
Next page

Contents Summary of FANUC Open CNC Setup procedure for Windows 95/NT4.0 Additional Manual

  • Page 1FANUC Open CNC Setup procedure for Windows 95/NT 4.0 1. Overview When Microsoft’s operating system, Windows 95(both Japanese and English version) and Windows NT Workstation 4.0(both Japanese and English version), are ordered as the OS for the personal computer(PC) module of PC-integrated i-Series an
  • Page 2I-O DATA CDPS-PX24/PCSC c. PCMCIA card service IBM PlayAtWill Version 3.0 or later We are sorry to trouble you, but please purchase SlimSCSI, the CD-ROM drive, and PlayAtWill, separately. And please make up the Setup Boot Disk according to the instructions described in the text file, Readme.txt, Rea
  • Page 36. Insert 2nd "Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207-K792#ZZ07- 2)" into floppy drive and enter “a:\hssb\win95 a:\hssb\win95” a:\hssb\win95 onto the [Copy Manufacturer's files from:] field. Then click [OK] button. 7. In case of A02B-0207-K791 Edition 01.1 and 01.2, confirm that "H
  • Page 44. In case that the PC module is for the T type of 160/180/210, 160i/180i/210i (including the multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows 95. Double-click the [MDI] icon and select the proper item on the [MDI Keyboard type:] according to the system to be connecte
  • Page 5Close [Control Panel]. 7. Click the [Start] button on the task bar of Windows 95 and then click [Shut down...]. Select "Shut down the computer?" and click [Yes] button. When the following message is displayed on the screen, remove floppy disk from the floppy drive and press Ctrl+Alt+Delete keys simu
  • Page 63. Windows NT Workstation 4.0 (Japanese/English version) 3.1. Re-installation of OS In case of Windows NT 4.0, FANUC ships the CD-ROM and three Setup Disks as the OS media for PC-integrated i-Series and Intelligent Terminal Type 2 of Open CNC(hereafter, "Device"). When you re-install Windows NT to t
  • Page 72. Right-click on the desktop field of Windows NT to open the menu. Select [Properties] from that menu to invoke [Display Properties] window. Click [Settings] tab. 3. Click [Display Type...] button and click [Change...] button. 4. Click [Have Disk…] button. Insert the first "Open CNC Drivers Disk(A0
  • Page 87. Remove the floppy disk from the floppy drive. When the following message is displayed on the screen, click [Yes] button. “Do you want to restart your computer now?” C. Calibration of touch panel 1. When Windows NT comes up, logon as the Administrator. Insert the first “Open CNC Drivers Disk” into
  • Page 94. Insert the second “Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207- K792#ZZ07-2)” into the floppy drive. 5. Click “3 1/2 Floppy (A:)” at [All Folders] and double-click “Hssb” at [Contents of ‘3 1/2 Floppy (A:)’]. Then double-click “Nt40” at [Contents of ‘Hssb’]. 6. Right-click hssb(hssb.
  • Page 10button. “Do you want to restart your computer now?” 8. In case that the Device is for the T type of 160/180/210, 160i/180i/210i (including the multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows NT. Double-click the [MDI] icon and select the proper item on the [MDI Keybo
  • Page 111. Logon to Windows NT as the Administrator. 2. Open [Control Panel] and double-click the [SCSI Adapters] icon 3. Click [Drivers] tab at [SCSI Adapters] dialog box. 4. Click [Add…] button. 5. Click Adaptec at [Manufacturers:] and select “Adaptec SlimSCSI 16-Bit PCMCIA SCSI Host Adapter” and click [O
  • Page 12and save it as the file name, PCMCIA.REG under a proper folder, e.g. C:\MMC. REGEDIT4 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atdisk] "Start"=dword:00000001 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Pcmcia] "InterruptMask"=dword:00000200 3. Open [Windows NT Explorer] and op