1. Fanuc
  2. FANUC Open CNC Setup procedure for Windows 95/NT4.0

FANUC Open CNC Setup procedure for Windows 95/NT4.0 Additional Manual Page 8

Additional Manual
Edit Date Desig. Description
Title
Draw. No.
FANUC Open CNC
Setup procedure for Windows95/NT4.0
A-63707E
FANUC LTD
Sheet
8/12
Cust.
01 980908 Kayano New registration
04
000217
Kayano
A
ll pages modified
7. Remove the floppy disk from the floppy drive. When the following message is displayed
on the screen, click [Yes] button.
“Do you want to restart your computer now?”
C.
C.C.
C. Calibration of touch panel
Calibration of touch panelCalibration of touch panel
Calibration of touch panel
1. When Windows NT comes up, logon as the Administrator. Insert the first “Open CNC
Drivers Disk” into the floppy drive.
2. Open [Windows NT Explorer].
Click the [Start] button and point to [Programs]. Then click [Windows NT Explorer].
3. Click “3 1/2 Floppy (A:)” at [All Folders] and double-click “Touch” folder at
[Contents of ‘3 1/2 Floppy (A:)’]. Double-click “Nt40” folder at [Contents of ‘Touch’].
4. Execute Calwinfe
CalwinfeCalwinfe
Calwinfe(Calwinfe.exe) by double-clicking its file name at [Contents of ‘Nt40’].
Calibration screen will appear. (The cross hairs in red is displayed on the upper-left corner
of the screen.)
5. Touch the center of the cross hairs with touch-pen. After touching, next cross hairs will
appear. Repeat touching 9 times.
6. After touching all 9 cross hairs, press [Enter] key.
7. Again press [Enter] key to finish this calibration.
8. Click “(C:)” at [All Folders] on [Windows NT Explorer]. Then point to [File] menu and
select [New] and click [Folder]. “New Folder” will come up. Enter “MMC” from full
keyboard, then press [Enter] key.
9. Copy Calwinfe
CalwinfeCalwinfe
Calwinfe(Calwinfe.exe) from “\Touch\Nt40” folder of [3 1/2 Floppy (A:)] into
“C:\MMC” folder.
D.
D.D.
D. High Speed Serial Bus(HSSB) driver installation
High Speed Serial Bus(HSSB) driver installationHigh Speed Serial Bus(HSSB) driver installation
High Speed Serial Bus(HSSB) driver installation
PC-integrated i-Series and Intelligent Terminal Type 2 (hereafter, “Device”) have High
Speed Serial Bus (HSSB) Type 2 interface in them.
The Device without ISA extension unit uses I/O port address 280H - 28FH as HSSB
interface. This I/O address cannot be changed.
In case of the Device with ISA extension unit, you can select the I/O port addresses by the
rotary switches. In case of HSSB multi-connection, determine the I/O port addresses so as
not to conflict with the other HSSB interface boards and the other computer resources,
before doing the following steps.
Each Device which has HSSB interface is given “Node” number and distinguished by node
number at Windows. This is true for the Device which has only one HSSB interface (its node
number equals to 0).
1. Logon to Windows NT as the Administrator.
2. Close all application programs. You must close the [Control Panel] if it is running.
3. Open [Windows NT Explorer].
Previous page
Next page

Contents Summary of FANUC Open CNC Setup procedure for Windows 95/NT4.0 Additional Manual

  • Page 1FANUC Open CNC Setup procedure for Windows 95/NT 4.0 1. Overview When Microsoft’s operating system, Windows 95(both Japanese and English version) and Windows NT Workstation 4.0(both Japanese and English version), are ordered as the OS for the personal computer(PC) module of PC-integrated i-Series an
  • Page 2I-O DATA CDPS-PX24/PCSC c. PCMCIA card service IBM PlayAtWill Version 3.0 or later We are sorry to trouble you, but please purchase SlimSCSI, the CD-ROM drive, and PlayAtWill, separately. And please make up the Setup Boot Disk according to the instructions described in the text file, Readme.txt, Rea
  • Page 36. Insert 2nd "Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207-K792#ZZ07- 2)" into floppy drive and enter “a:\hssb\win95 a:\hssb\win95” a:\hssb\win95 onto the [Copy Manufacturer's files from:] field. Then click [OK] button. 7. In case of A02B-0207-K791 Edition 01.1 and 01.2, confirm that "H
  • Page 44. In case that the PC module is for the T type of 160/180/210, 160i/180i/210i (including the multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows 95. Double-click the [MDI] icon and select the proper item on the [MDI Keyboard type:] according to the system to be connecte
  • Page 5Close [Control Panel]. 7. Click the [Start] button on the task bar of Windows 95 and then click [Shut down...]. Select "Shut down the computer?" and click [Yes] button. When the following message is displayed on the screen, remove floppy disk from the floppy drive and press Ctrl+Alt+Delete keys simu
  • Page 63. Windows NT Workstation 4.0 (Japanese/English version) 3.1. Re-installation of OS In case of Windows NT 4.0, FANUC ships the CD-ROM and three Setup Disks as the OS media for PC-integrated i-Series and Intelligent Terminal Type 2 of Open CNC(hereafter, "Device"). When you re-install Windows NT to t
  • Page 72. Right-click on the desktop field of Windows NT to open the menu. Select [Properties] from that menu to invoke [Display Properties] window. Click [Settings] tab. 3. Click [Display Type...] button and click [Change...] button. 4. Click [Have Disk…] button. Insert the first "Open CNC Drivers Disk(A0
  • Page 87. Remove the floppy disk from the floppy drive. When the following message is displayed on the screen, click [Yes] button. “Do you want to restart your computer now?” C. Calibration of touch panel 1. When Windows NT comes up, logon as the Administrator. Insert the first “Open CNC Drivers Disk” into
  • Page 94. Insert the second “Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207- K792#ZZ07-2)” into the floppy drive. 5. Click “3 1/2 Floppy (A:)” at [All Folders] and double-click “Hssb” at [Contents of ‘3 1/2 Floppy (A:)’]. Then double-click “Nt40” at [Contents of ‘Hssb’]. 6. Right-click hssb(hssb.
  • Page 10button. “Do you want to restart your computer now?” 8. In case that the Device is for the T type of 160/180/210, 160i/180i/210i (including the multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows NT. Double-click the [MDI] icon and select the proper item on the [MDI Keybo
  • Page 111. Logon to Windows NT as the Administrator. 2. Open [Control Panel] and double-click the [SCSI Adapters] icon 3. Click [Drivers] tab at [SCSI Adapters] dialog box. 4. Click [Add…] button. 5. Click Adaptec at [Manufacturers:] and select “Adaptec SlimSCSI 16-Bit PCMCIA SCSI Host Adapter” and click [O
  • Page 12and save it as the file name, PCMCIA.REG under a proper folder, e.g. C:\MMC. REGEDIT4 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atdisk] "Start"=dword:00000001 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Pcmcia] "InterruptMask"=dword:00000200 3. Open [Windows NT Explorer] and op