1. Fanuc
  2. FANUC Open CNC Setup procedure for Windows 95/NT4.0

FANUC Open CNC Setup procedure for Windows 95/NT4.0 Additional Manual Page 3

Additional Manual
Edit Date Desig. Description
Title
Draw. No.
FANUC Open CNC
Setup procedure for Windows95/NT4.0
A-63707E
FANUC LTD
Sheet
3/12
Cust.
01 980908 Kayano New registration
04
000217
Kayano
A
ll pages modified
6. Insert 2nd "Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207-K792#ZZ07-
2)" into floppy drive and enter “a:\hssb\win95
a:\hssb\win95a:\hssb\win95
a:\hssb\win95” onto the [Copy Manufacturer's files from:]
field. Then click [OK] button.
7. In case of A02B-0207-K791 Edition 01.1 and 01.2, confirm that "HSSB Type 2" is
displayed on [Models:] and click [Next>] button. Otherwise, select “FANUC HSSB Type 2
(ISA 1 Channel)” and click [Next>] button.
And confirm that "Input/Output Range 0280-028B" is displayed on [Resource
type/Setting] and click [Next>] button. Then click [Finish] button at the next window.
8. When [System Settings Change] dialog box appears, click [No] button.
9. In case that the PC module is for 160/180/210 or 160i/180i/210i, go to step 14. Otherwise
(for 150, 150i, Power Mate, Power Mate i), do the following steps, from 10 to 13.
10. Double-click the [System] icon in the [Control Panel] and click [Device Manager] tab.
11. Pop up the [HSSB Type 2] icon or [FANUC HSSB Type 2 (ISA 1 Channel)] icon by
clicking the left side + mark of [FANUC Open CNC].
And pop up HSSB setting dialog box by double-clicking this icon.
12. Click the [Setting] tab and select FS150, FS150i, Power Mate, or Power Mate i at
[CNC Type:] according to the system to be connected, then click [OK] button.
13. When [System Settings Change] dialog box appears, click [No] button. Click [OK]
button
on [System Properties] to close the dialog box. Again, as [System Settings Change]
dialog box appears, click [No] button.
14. Click the [Start] button on the task bar of Windows 95 and then click [Shut down...].
Select “Shut down the computer?” and click [Yes] button.
15. When the following message is displayed on the screen, remove floppy disk from the
floppy drive and press Ctrl+Alt+Delete keys simultaneously to restart the System.
It's now safe to turn off your computer
B. MDI key driver installation
B. MDI key driver installationB. MDI key driver installation
B. MDI key driver installation
1. Do the same steps like above 1 to 3, invoke the screen where you can select [Hardware
Types:]. Select [Keyboard] and click [Next>] button.
2. Click [Have Disk...] button. Insert 2nd "Open CNC Drivers Disk" into the floppy drive
and enter “a:\mdi\win95
a:\mdi\win95a:\mdi\win95
a:\mdi\win95” onto the [Copy Manufacturer's files from:] field. Then click
[OK] button.
3. Confirm that "FANUC MDI Keyboard" is displayed on [Models:] and click [Next>] button.
And then click [Finish] button at the next window.
When [System Settings Change] dialog box appears, click [Yes] button.
Previous page
Next page

Contents Summary of FANUC Open CNC Setup procedure for Windows 95/NT4.0 Additional Manual

  • Page 1FANUC Open CNC Setup procedure for Windows 95/NT 4.0 1. Overview When Microsoft’s operating system, Windows 95(both Japanese and English version) and Windows NT Workstation 4.0(both Japanese and English version), are ordered as the OS for the personal computer(PC) module of PC-integrated i-Series an
  • Page 2I-O DATA CDPS-PX24/PCSC c. PCMCIA card service IBM PlayAtWill Version 3.0 or later We are sorry to trouble you, but please purchase SlimSCSI, the CD-ROM drive, and PlayAtWill, separately. And please make up the Setup Boot Disk according to the instructions described in the text file, Readme.txt, Rea
  • Page 36. Insert 2nd "Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207-K792#ZZ07- 2)" into floppy drive and enter “a:\hssb\win95 a:\hssb\win95” a:\hssb\win95 onto the [Copy Manufacturer's files from:] field. Then click [OK] button. 7. In case of A02B-0207-K791 Edition 01.1 and 01.2, confirm that "H
  • Page 44. In case that the PC module is for the T type of 160/180/210, 160i/180i/210i (including the multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows 95. Double-click the [MDI] icon and select the proper item on the [MDI Keyboard type:] according to the system to be connecte
  • Page 5Close [Control Panel]. 7. Click the [Start] button on the task bar of Windows 95 and then click [Shut down...]. Select "Shut down the computer?" and click [Yes] button. When the following message is displayed on the screen, remove floppy disk from the floppy drive and press Ctrl+Alt+Delete keys simu
  • Page 63. Windows NT Workstation 4.0 (Japanese/English version) 3.1. Re-installation of OS In case of Windows NT 4.0, FANUC ships the CD-ROM and three Setup Disks as the OS media for PC-integrated i-Series and Intelligent Terminal Type 2 of Open CNC(hereafter, "Device"). When you re-install Windows NT to t
  • Page 72. Right-click on the desktop field of Windows NT to open the menu. Select [Properties] from that menu to invoke [Display Properties] window. Click [Settings] tab. 3. Click [Display Type...] button and click [Change...] button. 4. Click [Have Disk…] button. Insert the first "Open CNC Drivers Disk(A0
  • Page 87. Remove the floppy disk from the floppy drive. When the following message is displayed on the screen, click [Yes] button. “Do you want to restart your computer now?” C. Calibration of touch panel 1. When Windows NT comes up, logon as the Administrator. Insert the first “Open CNC Drivers Disk” into
  • Page 94. Insert the second “Open CNC Drivers Disk(A02B-0207-K791#ZZ07-2 or A02B-0207- K792#ZZ07-2)” into the floppy drive. 5. Click “3 1/2 Floppy (A:)” at [All Folders] and double-click “Hssb” at [Contents of ‘3 1/2 Floppy (A:)’]. Then double-click “Nt40” at [Contents of ‘Hssb’]. 6. Right-click hssb(hssb.
  • Page 10button. “Do you want to restart your computer now?” 8. In case that the Device is for the T type of 160/180/210, 160i/180i/210i (including the multi-path), or for 150, 150i, open [Control Panel] after the restart of Windows NT. Double-click the [MDI] icon and select the proper item on the [MDI Keybo
  • Page 111. Logon to Windows NT as the Administrator. 2. Open [Control Panel] and double-click the [SCSI Adapters] icon 3. Click [Drivers] tab at [SCSI Adapters] dialog box. 4. Click [Add…] button. 5. Click Adaptec at [Manufacturers:] and select “Adaptec SlimSCSI 16-Bit PCMCIA SCSI Host Adapter” and click [O
  • Page 12and save it as the file name, PCMCIA.REG under a proper folder, e.g. C:\MMC. REGEDIT4 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atdisk] "Start"=dword:00000001 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Pcmcia] "InterruptMask"=dword:00000200 3. Open [Windows NT Explorer] and op