B–63682EN/01
13. FUNCTION TO SIMPLIFY
PROGRAMMING
NC FUNCTION
89
Program
:
:
Wxx
:
:
:
:
:
:
Uxx to Vxx Storage and execution of
multiple blocks
Call and execution of
stored multiple blocks
The macro function can register a plurality of blocks as one macro and call
them whenever necessary.
When 2–digit figures 01 to 89 following address word U are added prior
to the instructions of plural blocks to be stored and the same figure is used
for the last figure following address word W, plural blocks instructed for
that period are stored in memory.
The 2–digit figure following address U or V is called the macro number.
When macro number is 01 – 59, the blocks between U and V are
memorized accompanying the execution of the command.
On the contrary, when the Macro No. is 60 to 89, the command is not
executed and only the storage operation is performed. It is possible to
normally give instructions to all blocks inserted between U and V except
instructions for Macro storage by other Macro Nos.
13.5
U/V/W MACRO
FUNCTION
13.5.1
Storage of Macro
(U, V Command)