
APPENDIX
B–63604EN/01
B. LIST OF FUNCTIONS AND
TAPE FORMAT
709
(4/4)
Functions Tape formatIllustration
Canned cycle
(G71 to G76)
(G90, G92, G94)
Refer to II.13. FUNCTIONS TO
SIMPLIFY PROGRAMMING
N_ G70 P_ Q_ ;
G71 U_ R_ ;
G71 P_ Q_ U_ W_ F_ S_ T_ ;
G72 W_ R_ ;
G72 P_ Q_ U_ W_ F_ S_ T_ ;
G73 U_ W_ R_ ;
G73 P_ Q_ U_ W_ F_ S_ T_ ;
G74 R_ ;
G74 X(u)_ Z(w)_ P_ Q_ R_ F_ ;
G75 R_ ;
G75 X(u)_ Z(w)_ P_ Q_ R_ F_ ;
G76 P_ Q_ R_ ;
G76 X(u)_ Z(w)_ P_ Q_ R_ F_ ;
G94 X_ Z_ K_ F_ ;
G90
G92
X_ Z_ I_ F_ ;
Canned cycle for drilling
(G80 to G89)
Refer to II.13. FUNCTIONS TO
SIMPLIFY PROGRAMMING
G80 ; Cancel
G83 X(U)_ C(H)_ Z(W)_ R_ Q_ P_ F_ K_ M_ ;
G84 X(U)_ C(H)_ Z(W)_ R_ P_ F_ K_ M_ ;
G85 X(U)_ C(H)_ Z(W)_ R_ P_ F_ K_ M_ ;
G87 Z(W)_ C(H)_ X(U)_ R_ Q_ P_ F_ K_ M_ ;
G88 Z(W)_ C(H)_ X(U)_ R_ P_ F_ K_ M_ ;
G89 Z(W)_ C(H)_ X(U)_ R_ P_ F_ K_ M_ ;
Constant surface speed control
(G96/G97)
Surface speed
(m/min or feet/min)
Spindle speed
N (min
–1
)
G96 S_ ; Starts constant surface speed control
(Surface speed command)
G97 S_ ; Constant surface speed is cancelled
(Maximum spindle speed command)
Chamfering, Corner R
k
i
R
C"k
R_
P_ ;
X_ ;
C"i
R_
P_ ;
Z_ ;
Absolute/incremental
programming
(when G code system A)
X_Z_C_ ; Absolute programming
U_W_H_ ; Incremental programming
(Identified by an address word specified with a G
function such as G00 or G01)
Absolute/incremental
programming
(G90/G91)
(during G code system B, C)
G90_ ; Absolute programming
G91_ ; Incremental programming
G90_ G91_ ; Used together
(G98/G99)
(during G code system B, C)
G98
G99
I point
R point
Z point
G98_ ;
G99_ ;