
C. 20–PIN INTERFACE CONNECTORS
AND CABLES
B–63463EN/01
APPENDIX
110
Machine tool builders are required to manufacture or procure the
materials for the cable assemblies to be used with their products. FANUC
recommends the following materials as being suitable for interface
connectors. Individual machine tool builders are encouraged to contact
each cable manufacturer for themselves, as required.
Table C.5 Recommended materials for cable assemblies
Material Use Constitution FANUC specification
number
Manufacturer Remark
10–pair cable General use 0.08 mm
2
10 pairs A66L–0001–0284#10P Hitachi Cable, Ltd.
Oki Electric Cable
Co., Ltd.
12–conductor
composite
cable (Note)
Pulse coder
Linear scale
0.5 mm
2
6 conductors
0.18 mm
2
3 pairs
A66L–0001–0286 Hitachi Cable, Ltd.
Oki Electric Cable
Co., Ltd.
20 m or less
0.75 mm
2
6 conductors
0.18 mm
2
3 pairs
A66L–0001–0402 Oki Electric Cable
Co., Ltd.
30 m or less
1.25 mm
2
6 conductors
0.18 mm
2
3 pairs
A66L–0001–0403 Oki Electric Cable
Co., Ltd.
50 m or less
NOTE
For a pulse coder, scale, or other unit using +5 V power,
select cable wires considering the voltage drop due to the
cable resistance.
C.5
MATERIALS FOR
CABLE ASSEMBLIES