
B–63463EN/01
7. CONNECTION TO PERIPHERALS
45
Recommended line material: A66L–0001–0041 (#24AWG x 10 pairs), 0.113 Ω/m
Recommended connector (on JD40): A02B–0120–K303 (including the connector and the case described below)
Connector: Hirose Electric Co., Ltd. FI40–2015S, soldering type
Case: Hirose Electric Co., Ltd. FI–20–CV
Recommended connector (inside the cabinet): A02B–0118–K900, 17JE–23150–02 (D8B) made by Daiichi
Denshi Kogyo K.K.
NOTE
The reason why the shell of the connector (D–shaped metal portion of the D–SUB connector)
is connected to 0V is to enable detachable connection.
Cable J6 has 15–pin D–SUB connectors on both ends. Purchase the cable
from FANUC.
Unit drawing No. Cable length Cable resistance
A02B–0118–K820 2m 0.37Ω
A02B–0118–K821 7m 1.3Ω
A02B–0118–K822 14m 2.6Ω
The upper limit on the sum of the lengths of J161 and J6 is 40 m. Besides,
there is a restriction due to the power supply voltage drop.
For the dust protected type DPL/MDI, the resistance of the power lines
(both 0– and 5–V lines) for the cables may be up to 3.5
Ω . The resistance
is the sum of the resistances of J161 and J6.
7.1.4
Cable J6
7.1.5
Cable Length
Restrictions