1. Fanuc
  2. FANUC Series 30i/31i/32i

FANUC Series 30i/31i/32i Additional Manual Page 11

Additional Manual
Edit
Apprv.Desig.
Date
Design
Date
FANUC Series 30
i
/31
i
/32
i
–MODEL A
IMPROVEMENT OF FILE OPERATION
ON THE PROGRAM FOLDER SCREEN
A
-90423E
Nov.30.2005
11/12
New design
Nov.30.2005
01
Page
Title
Draw
No.
Descri
p
tion
Explanation
・Multiple files that can be selected
Only files in the same folder can be selected by soft key [SELECT]. Files in different
devices or folders cannot be selected together.
A maximum of 10 files can be selected.
・Renaming a file name during a copy or movement
When only one file is selected for a copy or movement, the file can be renamed during a copy
or movement.
To do this, select the file, enter the file name, and press soft key [COPY] or [MOVE]. The
file is copied or moved with its name changed.
・Copying or moving files within the same folder
A file cannot copied or moved within the same folder.
If an attempt is made to copy or move it, the warning message " SAMEFILE NOTCOPY"
appears.
When only one file is selected and its name is changed during a copy or movement, however,
a copy or movement within the same folder can be performed.
・Overwriting a file
When a copy or movement is performed, if a file with the same name is present in the copy or
movement destination folder, the character string "REWRITE：File Name" blinks under the
key-in buffer. Press soft key [OVER WRITE] to overwrite the file or press soft key [NO] to
cancel the operation.
・Searching for a file during file selection
When a file to be copied or moved is selected after soft key [SELECT START] is pressed,
soft key [SEARCH] can be used to search for a file in a folder.
To do this, enter the name of a file to be searched for and press [SEARCH]. If the file with
the name is found, the cursor moves to the file. If the file is not found, the warning message
" SPECIFIED PROGRAM NOT FOUND" appears.
The action triggered by soft key [SEARCH] is to move the cursor to the program searched for
on the list screen. Switching of operation by bit 5 (PES) of parameter No. 11302 is
impossible.
・Display of selected file name
As for the file selected by the softkey [SELECT], the background color of the file name
display is changed. The background color of the file name display is maintained until the
selective state is released.
・Releasing file selection
To release file selection made by soft key [SELECT], move the cursor to the selected file and
press soft key [SELECT] again.
The selection of all selected files is released when:
・Soft key [CANCEL] is pressed during selection.
・A copy or movement is completed.
Previous page
Next page

Contents Summary of FANUC Series 30i/31i/32i Additional Manual

  • Page 1FANUC Series 30i/31i/32i -MODEL A IMPROVEMENT OF FILE OPERATION ON THE PROGRAM FOLDER SCREEN Specifications FANUC Series 30i/31i/32i –MODEL A Title IMPROVEMENT OF FILE OPERATION ON THE PROGRAM FOLDER SCREEN Draw A-90423E No. 01 Nov.30.2005 New design Edit Date Design Description Page 1/12 Date Nov.3
  • Page 21.1 SEPARATE DISPLAY OF THE PROGRAM FOLDER SCREEN Overview On the program folder screen, information on two folders can be displayed in the upper and lower views separated as shown below. Fig. 1.1 (a) Program Folder Screen (Separate Display Screen) Since information on files in a different device or
  • Page 3Separate Display Switching Procedure Procedure ・ For the 10.4-inch monitor screen 1 Press function key PROG to display the program folder screen. 2 Press soft key [(OPRT)]. 3 Press rightmost soft key [+] (continuous menu key) twice. Soft key [MULTI LIST] appears. Fig. 1.1 (b) Program Folder Screen (
  • Page 4Fig. 1.1 (c) Program List Screen (Separate Display Screen) 5 Press soft key [SINGLE LIST] to return to the original program list display. At this time, the folder selected as operable in separated display is indicated. FANUC Series 30i/31i/32i –MODEL A Title IMPROVEMENT OF FILE OPERATION ON THE PROG
  • Page 5・ For the 15-inch monitor screen 1 Press function key PROG to display the program folder screen. 2 Press horizontal soft key [(OPRT)]. 3 Press rightmost horizontal soft key [+] (continuous menu key) twice. Horizontal soft key [MULTI LIST] appears. Fig. 1.1 (d) Program Folder Screen (Normal Screen) 4
  • Page 6Switching of Folder Views where File Operation is Enabled in Separate Display To switch the folder view where file operation is enabled between separated folder views, follow the procedure below. In the folder view where file operation is enabled, the cursor appears in the file list. Procedure 1 Whe
  • Page 7Explanation ・File operation in separate display In separate display, the following operations are enabled. <1> A different device or folder can be selected or displayed for each folder view. <2> Files can be copied or moved between the folders selected in two folder views. (For details, see Section
  • Page 8Parameters #7 #6 #5 #4 #3 #2 #1 #0 11318 MLD [Input type] Parameter input [Data type] Bit system common type #1 MLD On the program folder screen, separate display is 0: Disabled. 1: Enabled. NOTE This parameter is enabled for 10.4- and 15-inch monitors. Restrictions ・Devices that can be selected at
  • Page 91.2 COPYING OR MOVING FILES BETWEEN DEVICES Overview Files can be copied or moved between different devices. The following two methods can be used on the program folder screen. ① Copying or moving files (changing devices) Select a file to be copied or moved, select the copy or movement destination f
  • Page 10Copying or Moving Files in Separate Display Procedure 1 ・Selecting the copy or movement destination folder after selecting a file 1 Select EDIT mode. 2 Press function key PROG to display the program folder screen. 3 Press soft key [(OPRT)]. 4 Press rightmost soft key [+] (continuous menu key) twice.
  • Page 11Explanation ・Multiple files that can be selected Only files in the same folder can be selected by soft key [SELECT]. Files in different devices or folders cannot be selected together. A maximum of 10 files can be selected. ・Renaming a file name during a copy or movement When only one file is selecte
  • Page 12・The copy or movement destination folder is changed during selection. ・Selection is finished with soft key [SELECT END] and selection is started again with soft key [SELECT START]. Restrictions ・Operation mode Select the EDIT mode before copying or moving files operations between different devices.