Draw.
Title
I. Na
atomo 05.01.07 01
PAGE
3/17
FANUC LTD.
B-65282EN/05-08
Descri
tionDesi
n Date Edit
Changes and an addition
I. Na
atomo 05.06.21 02
bsolute αiCZ Sensor
Cable length 1200mm
RM15WTP-12P
(Hirose Electric Co.Ltd)
External diameter : φ23
4. Outline Drawing
See section 5 “Mounting the Absolute αiCZ Sensor” about the mounting method of αiCZ Sensor
NOTE
・Tolerance of the inner diameter (*1) of the detection ring is from zero to the larger value. (*2) shows the tip diameter of
the AB ring.
・Tolerance of the inner diameter (*3) of the sensor mounting ring is from zero to the larger value. (*4) shows the outer
diameter of the sensor mounting ring.
・(*5) shows the length between the bottom surface of the sensor mounting ring and bottom surface of the detection ring.
・Use Absolute αiCZ Sensor at temperatures not exceeding 50℃.
・Since the detection ring, the sensor, and the detection circuit are adjusted in a set, please use them by the set.
・Absolute αiCZ Sensor is a precise device, so be careful in its handling. Particularly, don’t apply shock or stress to the
sensor element.
・Absolute αiCZ Sensor is an electronic device. Provide the protection on the machine against chips, oil, water, or any
other harmful substance.
・The waterproof performance of the detection circuit is IP55, but the continuous exposure to the coolant may cause the
trouble. Take care in deciding the place to fix the detection circuit so that it will not exposed to the coolant.
・Do not add the vibration exceeding 1G to the detection circuit.
・To ensure ease of maintenance, install Absolute αiCZ Sensor in a location where it can be approached easily.
・The detection circuit box should be connected to the earth. The back side of the detection circuit box is not painted so
that it is possible to earth the box by fastening the fixing bolt.
4.1 Absolute αiCZ Sensor 512S
A860-2142-T411
This bolt for fixing AB/Z ring.
Fastened before shipment
sensor
head
For the sensor
mounting ring attachment
4-
φ5.5 through
P.C.D.
φ124
Sectional drawing
of A-A’
li
nment track
Sensor mounting ring
sensor
head
For detection circuit attachment
4-
φ5 through
6-φ5.5 through,
P.C.D. φ92
B rin
Z rin
For detection ring attachment
Detection circuit