B-65282EN/05 3.ORDERING INFORMATION
- 69 -
3.1.3.14 Battery for absolute Pulsecoder
For connection of a battery for an absolute Pulsecoder, two methods
are available. For each method, options are available.
NOTE
1 A battery needs to be maintained periodically. So,
[connection type 1] is recommended because this
type uses a battery (consisting of four size D alkaline
cells) easily obtainable from the market.
2 A built-in battery used with [connection type 2] is not
available on the market, but needs to be purchased
from FANUC. So, it is recommended to purchase
spare built-in batteries.
[Connection type 1]
Power is fed from one battery to multiple SVMs.
(See Subsection 9.3.2.10.)
Category Ordering number Name Remarks
A06B-6050-K061 Battery
A06B-6050-K060 Battery case
Optional
A06B-6110-K211
Battery connection
connector
Four pieces of
size D battery
[Connection type 2]
A battery is built into each SVM.
(See Subsection 9.3.2.10.)
Category Ordering number Name Remarks
A06B-6073-K001 Built-in battery
One piece of
lithium battery
A06B-6114-K500 Battery case
Optional
A06B-6114-K501 Battery case
SVM1-360i
SVM1-180HVi
SVM1-360HVi