3.ORDERING INFORMATION B-65282EN/05
- 62 -
3.1.3.8 Cables
DC link short bar
Category Ordering number Applicable terminal-to-terminal distance
A06B-6078-K801 90mm (86mm - 94mm)
A06B-6078-K803 64mm (60mm - 68mm)
A06B-6078-K840 154mm (150mm - 158mm)
A06B-6078-K841 300mm (298mm - 302mm)
Optional
A06B-6078-K842 150mm (146mm - 154mm)
See 9.3.1.2 for details.
A06B-6078-K842 is used to connect between a 150-mm wide
amplifier (left) and a 300-mm wide amplifier (right).
Cables for connection of modules
Category Ordering number
Cable
length
Applicable amplifier width
A06B-6110-K801 200mm 150mm width amplifier
A06B-6110-K802 150mm 90mm width amplifier
A06B-6110-K803 100mm 60mm width amplifier
Optional
A06B-6110-K804 400mm 300mm width amplifier
NOTE
1 The above table lists the cable for each interface
between modules.
For connection of CXA2A and CXA2B
2 The connection cable for the battery of the absolute
pulse coder is not included in the cables shown
above. For details, see Subsection 9.3.2.10.
Cables for connection of detectors
Category Ordering number Use Remarks
A06B-6078-K811
For Mi sensor,
MZi sensor or
BZi sensor
Cable length : 7m
A06B-6078-K814
Cable length : 7m
Connector figure : Straight
Optional
A06B-6078-K815
For
Positioncoder
Cable length : 7m
Connector figure : Elbow
Cables for FSSB interface
Category Ordering number
Cable
length
Applicable amplifier
width
A66L-6001-0023#L150R0 150mm
Optional
A66L-6001-0023#L300R0 300mm
For between SVM and SVM