
B–64112EN/01
1. CONTROLLED AXES
NC FUNCTION
21
0i Mate–TC 0i Mate–MC 0i–TC 0i–MC
Number of controlled axes
(including Cs axis)
3 3 4 4
Number of controlled paths 1 1 1 1
Number of basic controlled axes 2 3 2 3
Number of basic simultaneously
controlled axes
2 3 2 3
Number of controlled
axes expanded (all)
3 3 4 4
Number of simultaneously
controlled axes expanded (all)
3 3 4 4
Axis control by PMC 0 0 4 4
Cs contour control 1 0 1 1
T series :
The two basic axes are always set to X and Z. Additional axes can be
selected from A, B, C, U, V, W, and Y freely.
NOTE
If U, V, or W is used as an axis name, the G code system
must be either B or C.
M series :
The three basic axes are set to X, Y, and Z. Additional axes can be
selected from A, B, C, U, V, and W freely.
1.1
NUMBER OF THE ALL
CONTROLLED AXES
1.2
AXIS NAMES