
EDIT.
SHEET
DRAW. NO.
CUST.
TITLE
13
30
DESCRIPTION DESIG. DATE
FANUC PANEL i
Maintenance Manual
-83138E
4. BIOS Setup
4.1. What is ‘BIOS SET-UP’
“BIOS Set-up” is a program to set up BIOS settings, and operating environment for the PANEL i is defined
by these BIOS settings.
It is unnecessary to run the set-up program normally because default BIOS settings are set at shipping.
Use PANEL i with this default environment as far as possible because an inadvertent change to the
operating environment may cause a failure.
4.2. Keys Used for Operation
The keys used for set-up have the following functions.
- [ ] [ ] keys : Move the cursor to the next or previous item.
- [ ] [ ] keys : Move the cursor to the next or previous menu.
- [Enter] key : Select the sub-menu of the item in case of Main, Advanced, and Power Savings Menu.
: Execute command in case of Exit Menu.
- [ESC] key : Exit.
- [-] [+] keys : Change values.
- [F1] key : Display helps.
- [F9] key : Setup defaults.
- [F10] key : Setup previous values
A keyboard is necessary at BIOS setup. Select one of following devices.
A full keyboard connected to PS/2 port.
A full keyboard connected to USB port.
Front panel of PANEL i for Automotive.
MDI unit or softkey is not available. Connect other full keyboard.
Use PANEL i with default BIOS settings as far as possible.
Fanuc has not checked behavior of PANEL i in case that any BIOS setting is
changed from default settings. So if any setting is changed, make sufficient
confirmations.