5. INPUT AND OUTPUT OF DATA
B--63005EN/02
416
The tool data file, cutting condition data, surface roughness data, pre--tool
list, and chuck/tailstock figure data can be punched out to an external I/O
device.
(1) Connect an external I/O device and set necessary parameters, such as
device selection.
(2) Select EDIT mode.
(3)Display the tool data menu screen, then press [+]. The following soft
keys appear. Press [PUNCH].
<
11
10
READ PUN
CH
CLEA
R
\
The setting data punched out in the previous section can be read.
(1) Connect an external I/O device and set necessary parameters, such as
device selection.
(2) Set “PARAMETER WRITE” in the setting data to 1.
(3)When the FANUC cassette adapter is used, set the file number for
parameter No. 9887 (TLFLNO).
(4)Display the tool data menu screen and place the system in the
emergency stop state.
(5) Press [READ].
The tool data file, cutting condition data, surface roughness data, pre--tool
list, and chuck/tailstock figure data can be cleared.
(1) Set “PARAMETER WRITE” in the setting data to 1.
(2)Display the tool data menu screen. After switching to EDIT mode,
place the system in the emergency stop state.
(3) Press [CLEAR].
Output of conversational
tool setting data
Input of conversational
tool setting data
Clearing of
conversational tool
setting data