3. HSSB interface board (CNC side) for LCD mounted type
(page 235 of manual)
3.1. Setting of ROTARY SWITCH in case of connecting to the PC
The power-on start sequence can be modified using rotary switch on the board.
setting of
rotary
switch
description
0
Setting for maintenance.
The start menu is displayed. It is possible to start boot and IPL from the PC.
1
Setting for usual operation.
The start menu is not displayed.
It is impossible to start boot or IPL from the PC.
2
The CNC and PC are started independently of each other without handshake.
CNC
CNC is available if PC is not turned on or not connected.
(Display for CNC and MDi or Operation panel etc. are needed to
operate.)
The start menu is not displayed if PC is connected and turned on.
PC
The start menu is not displayed and it is impossible to start boot or IPL
from the PC if CNC is connected and turned on.
This setting makes PC or CNC be able to be turned on/off the
power individually if HSSB device driver for Windows 95/98, NT4.0
or 2000 is installed.
In case of Multi-connection (connecting some CNCs to one PC),
please set to this setting usually.
EDIT.
FANUC LTD
SHEE
DRAW. NO. CUST
TITLE
006
DESCRIPTIONDESIG.DATE
B-63005EN/02-1