1.MANUAL GUIDE 0i MANUAL GUIDE 0i B-63844EN/02
- 768 -
1.5.4.3 Line
As part of the auxiliary calculation for a line, the end point coordinate
and angle can be calculated.
The following soft-keys are displayed on the auxiliary calculation
menu screen.
[ENDPNT] : Menu screen for end point calculation is displayed
[ANGLE] : Menu screen for angle calculation is displayed
For the end point calculation, these items are similar to those for the
start point, so refer to the preceding explanation.
Selecting type of calculation
On the menu screen for the auxiliary calculation of a line, press
[ANGLE]. The following menu screen for angle calculation appears.
By pressing the cursor key, you can scroll through the menu
comments until you find the type that you want to select.
Entering data for calculation
- Angle of the line passes 2 points
Data item Comment
POINT X X coordinate of the 1st passing point on the line
POINT Y Y coordinate of the 1st passing point on the line
POINT U X coordinate of the 2nd passing point on the line, this
should be apart from the 1st point
POINT V Y coordinate of the 2nd passing point on the line, this
should be apart from the 1st point
SELECT CALCULATION OF ANGLE (LINE)
1. ANGLE OF LINE
[ ENDPT ][ ANGLE ][ ][ OK ][CANCEL ]
1.
2.