PROGRAMMING
B–63614EN/01
19. HIGH SPEED CUTTING
FUNCTIONS
375
Item Function
Rapid traverse override
1% step
0 – 100 %
Feed per minute (G94) f
Feed per revolution
(G95)
×
Rapid traverse bell–
shaped
Acceleration / decelera-
tion
f
Linear acceleration / de-
celeration
Before cutting feed in-
terpolation
f (Maximum 15 blocks are read in advance.)
Feedrate override 0 – 254 %
One–digit F code feed
×
External deceleration f(The option of external deceleration
is needed.) (Note)
Program input f : It is possible to command.
× : It is not possible to command.
Item Function
Plane selection (G17,
G18, G19)
f
Local coordinate system
(G52)
f(The option of workpiece coordinate system
is needed.) (Note)
Machine coordinate
system (G53)
f(The option of workpiece coordinate system
is needed.) (Note)
Workpiece coordinate
system (G54 – G59,
G54.1 Pxx)
f(The option of workpiece coordinate system
is needed.) (Note)
(The option of adding workpiece coordinate
system is needed.)
Workpiece coordinate
system (G92)
(Note)
Workpiece coordinate
system preset (G92.1)
f(The option of workpiece coordinate system
preset is needed.) (Note)
Programmable data
input (G10)
f(Tool offset value, workpiece origin offset value
and parameter can be changed.) (Note)
(The option of programmable data input
is needed.)
Custom macro B f(The option of custom macro B
is needed.) (Note)
Interruption type custom
macro
×