
H. TERMINAL MODULE A
B–63323EN/03
528
+24E +24E
Connector Panel I/O Module
Terminal Module A
Address Number
Bit Number
CB150
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
XT150A
(30)
(31)
(32)
XT150B
(17)
(18)
(19)
RV
RV
RV
RV
RV
RV
RV
RV
Xm+2.0
Xm+2.1
Xm+2.2
Xm+2.3
Xm+2.4
Xm+2.5
Xm+2.6
Xm+2.7
(14)
(15)
(16)
(1)
(2)
(3)
NOTE
Xm+0.0 through Xm+0.7 are DI pins for which a common
voltage can be selected. That is, set up a setting pin XB1 on
“0V” side, set up a setting pin XB2 on “+24” side, by
connecting the DICOM0 to the +24V power supply, a DI
signal can be input with its logical state reverse. If, however,
a cable is connected to ground, it has the same effect as
inputting an ON state DI signal. To prevent this from
occurring, set up a setting pin XB1 on “+24” side, set up a
setting pin XB2 on “0V” side, the connection of the DICOM0
to the 0V power supply is recommended wherever possible.