B-63322EN/03 NC FUNCTIONS 17.MEASUREMENT FUNCTIOM
- 231 -
17.10 CHANGING ACTIVE OFFSET VALUE WITH MANUAL MOVE
If you want to perform roughing or semi-finishing with a single tool,
you may fine-adjust the tool length compensation or cutter
compensation. Moreover, you may want to fine-adjust the setting of
the workpiece origin offset that was already set up. This function can
change the offset (such as tool length compensation, cutter
compensation, or workpiece origin offset) for the currently valid offset
number or workpiece coordinate system among those specified, by
adding an amount of axis movement made by manual feed
automatically.