B-63322EN/03 NC FUNCTIONS 30.STATUS OUTPUT
- 375 -
30.20 OILING SIGNAL (CANNED CYCLE)
In drilling canned cycles (G73, G74, G76, G81 to G89), the oiling
signal OIL can be sent to the PMC during movement from the R point
to the Z point.
Two methods of sending the oil signal OIL are available: type A and
type B. With type A, the oiling signal OIL is set to 0 by specifying an
oiling time. With type B, the oiling signal OIL is set to 0 when the
oiling completion signal OILF is returned from the PMC.
Whether to use the oiling signal and which type (A or B) to use when
the oiling signal is used can be selected by parameter setting.