B-63322EN/03 NC FUNCTIONS 5.FEED FUNCTION
- 81 -
5.8 AUTOMATIC FEEDRATE CONTROL BY AREA
When an area on the XY plane(*1) is specified in cutting mode in
automatic operation, area override can be applied to a specified
feedrate(*2) if the tool is in the specified area.
Up to four areas can be set on the XY plane.
For each of the four areas, a separate area override can be set.
NOTE
1 X and Y denote the two axes set to 1 and 2 in
parameter No. 1022, respectively.
2 (Specified feedrate) =
(Cutting feedrate specified with F in program) x
(Feedrate override)
Fig.5.8 Example of Setting Four Areas on the XY Plane