OPERATION11. SETTING AND DISPLAYING DATA
B–63604EN/01
600
Press function key
POS
to display the current position of the tool.
The following three screens are used to display the current position of the
tool:
⋅Position display screen for the work coordinate system.
⋅Position display screen for the relative coordinate system.
⋅Overall position display screen.
The above screens can also display the feedrate, run time, and the number
of parts. In addition, a floating reference position can be set on these
screens.
Function key
POS
can also be used to display the load on the servo motor
and spindle motor and the rotation speed of the spindle motor (operating
monitor display).
Function key
POS
can also be used to display the screen for displaying
the distance moved by handle interruption. See Section 4.6 for details on
this screen.
Displays the current position of the tool in the workpiece coordinate
system. The current position changes as the tool moves. The least input
increment is used as the unit for numeric values. The title at the top of
the screen indicates that absolute coordinates are used.
Display procedure for the current position screen in the workpiece coordinate system
1 Press function key
POS
.
2 Press soft key
[ABS].
3 On (7 soft keys display unit), press the
[ABS] soft key one more time
to display the coordinates along axes other than the six standard axes.
MEM STRT MTN *** 09:06:35
[ ABS ] [ REL ] [ ALL ] [ HNDL ] [(OPRT)]
ACTUAL POSITION(ABSOLUTE) O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M S 0 T0000
X 123.456
Z 456.789
11.1
SCREENS
DISPLAYED BY
FUNCTION KEY
@pos
POS
11.1.1
Position Display in the
Workpiece Coordinate
System