
24
50
FANUC Series 16i-TB
2 CPU 3-path control function
Specifications
-78884E
ED. DATE DESIG. DESCRIPTION
TITLE
DRAW.NO.
01 Aug.01.’02 Newly registered
SHEET
superimposed control and the move pulse of another axis is not
superimposed.
8190 Rapid traverse rate of an axis under superimposed control
[Data type] Two-word axis
[Unit of data]
[Valid data range]
Valid data range
Increment system Unit of data IS-A,IS-B IS-C
Millimeter machine 1 mm/min 30 to 240000 30 to 100000
Inch machine 0.1 inch/min 30 to 96000 30 to 48000
Rotation axis 1 deg/min 30 to 240000 30 to 100000
Set a rapid traverse rate for each of the axes when the rapid traverse
override of the axes (master and slave axes) under superimposed control is
100%.
8191
F0 velocity of rapid traverse override of an axis under superimposed
control
[Data type] Word axis
[Unit of data]
[Valid data range]
Valid data range
Increment system Unit of data IS-A,IS-B IS-C
Millimeter machine 1 mm/min 6 to 15000 6 to 12000
Inch machine 0.1 inch/min 6 to 600 6 to 4800
Rotation axis 1 deg/min 6 to 15000 6 to 12000
This parameter specifies the F0 velocity of rapid traverse override for each of
the axes (master and slave axes) under superimposed control.
8192
Linear acceleration/deceleration time constant in rapid traverse of an
axis under superimposed control
[Data type] Word axis
[Unit of data] ms
[Valid data range] 0 to 4000
This parameter specifies the linear acceleration/deceleration time constant in
rapid traverse for each of the axes (master and slave axes) under
superimposed control.