
28
50
FANUC Series 16i-TB
2 CPU 3-path control function
Specifications
-78884E
ED. DATE DESIG. DESCRIPTION
TITLE
DRAW.NO.
01 Aug.01.’02 Newly registered
SHEET
(4) 2
nd
and 3
rd
spindle
If 1
st
spindle is a serial spindle, 2
nd
and 3
rd
spindles are also able to use in a 3-path lathe.
The 2
nd
and 3
rd
spindles are controlled by PMC signals (SIND
#1
,SIND2
#1
,SIND3
#1
,SIND
#2
,SI
ND2
#2
,SIND3
#2
, SIND
#3
,SIND2
#3
,SIND3
#3
) or by the multi-spindle control function. If using
the multi-spindle control function, 1
st
spindle and 2
nd
spindle are connected with the serial
interfaces and 3
rd
spindle is connected with the analog interface.
Spindle speed is commanded by the numerical value with 5-digits continued on “S”. This
command is valid for the spindle selected by the spindle select signal (SWS
#1
to SWS
#3
). It is
possible that plural spindles revolve simultaneously by selecting and giving the same
command to them. Each spindle keeps the command value (spindle speed). And it is also
kept after not being selected. Using this function, it is possible to revolve each spindle with
different speed at the same time. And it is also possible to stop revolution of unnecessary
spindles by the signals (*SSTP
#1
to *SSTP
#3
) provided to stop revolution.
It is possible to execute thread cutting or feed per revolution by taking in the feedback pulse
from position coders to be fitted in 1
st
and 2
nd
spindle. It is selected by signals that taking in
the feedback pulse from the position coders to be fitted in which spindles. It can not take in
the feedback pulse of 3
rd
spindle. When the feedback of 2
nd
spindle position coder is used,
refer to the explanation of parameter No. 3706#3 PCS.
It shows on the next paragraph that the state in 3-spindle control and all spindles connected.
Now in 2-spindle control, all spindles of path 3 (SP1
#3
,SP2
#3
,SP3
#3
) can not be used. And in
1-spindle control, all spindles of path 2 and path 3 (SP1
#2
,SP2
#2
,SP3
#2
,SP1
#3
,SP2
#3
,SP3
#3
) can
not be used.
(a) The relation between the spindle command (path) and the spindle (the state in 3-spindle
control and all spindles connected)
Path 1 Path 2 Path 3
Spindle command 1 Spindle command 2 Spindle command 3
(i) (ii) (iii)
SLSPA
#1
SLSPB
#1
SLSPA
#2
SLSPB
#2
SLSPA
#3
SLSPB
#3
1 0------- (i) 1 0------- (i) 1 0------- (i)
0 1------- (ii) 0 1------- (ii) 0 1------- (ii)
1 1------- (iii) 1 1------- (iii) 1 1------- (iii)
SWS1
#1
SWS2
#1
SWS3
#1
SWS1
#2
SWS2
#2
SWS3
#2
SWS1
#3
SWS2
#3
SWS3
#3
SIND1
#1
SIND2
#1
SIND3
#1
SIND1
#2
SIND2
#2
SIND3
#2
SIND1
#3
SIND2
#3
SIND3
#3
SP1
#1
SP2
#1
SP3
#1
SP1
#2
SP2
#2
SP3
#2
SP1
#3
SP2
#3
SP3
#3
PC1
#1
PC2
#1
PC1
#2
PC2
#2
PC1
#3
PC2
#3
(i):spindle command on path 1 (ii):spindle command on path 2 (iii):spindle command on path 3