
46
50
FANUC Series 16i-TB
2 CPU 3-path control function
Specifications
-78884E
ED. DATE DESIG. DESCRIPTION
TITLE
DRAW.NO.
01 Aug.01.’02 Newly registered
SHEET
[Data type] 2-word
[Unit of data] Output unit
[Valid data range] 0-±99999999
Setting offset amount on each axis at the pair of points ((i), (ii)) on max. 3 rectangular
parallelepipeds ((a), (b), (c)) composing the tool post 1. The offset amount is the
distance with signs from the machine reference point (or the reference point of a
rectangular parallelepiped) to the each point. It ignores the setting data of exceeding
the number of rectangular parallelepipeds.
12525 Axis number of the facing axis (width axis) on the tool post 2
12526 Axis number of the parallel axis 1 (length axis) on the tool post 2
12527 Axis number of the parallel axis 2 (height axis) on the tool post 2
[Data type] Byte
[Valid data range] 0,9 to 12
Setting the axis numbers of the facing axis (width axis), the parallel axis 1 (length
axis) and the parallel axis (height axis) on the tool post 2. If the setting data is 0, it
means “the fixed axis”.
:
12547 Offset amount on the parallel axis 2 at the point (ii) of the rectangular
parallelepiped (c) on the tool post 2.
Setting parameters about tool post 2 as same as tool post 1.
12550 Axis number of the facing axis (width axis) on the tool post 3
12551 Axis number of the parallel axis 1 (length axis) on the tool post 3
12552 Axis number of the parallel axis 2 (height axis) on the tool post 3
[Data type] Byte
[Valid data range] 0,17 to 20
Setting the axis numbers of the facing axis (width axis), the parallel axis 1 (length
axis) and the parallel axis (height axis) on the tool post 3. If the setting data is 0, it
means “the fixed axis”.
:
12572 Offset amount on the parallel axis 2 at the point (ii) of the rectangular
parallelepiped (c) on the tool post 3.
Setting parameters about tool post 3 as same as tool post 1.