OPERATION12. GRAPHICS FUNCTION
B–64144EN/01
668
⋅ AXES
Specify the plane to use for drawing. The user can choose from the
following six coordinate systems.
Y
Z
X
X
X
X
YYZ
Z
Z
Z
Y
Y
(1) (2) (3)
(4) (5)
(6)
= 0 : Select (1)
= 1 : Select (2)
= 2 : Select (3)
= 3 : Select (4)
= 4 : Select (5)
= 5 : Select (6)
The rotating angle (horizontal, vertical) for isometric display of 5) and 6) is
fixed at 45°in both cases.
Fig. 12.1 (d) Coordinate system
⋅ RANGE (Max., Min.)
Set the graphic range displayed on the screen by specifying maximum
and minimum values along each axis.
X=Maximum value X=Minimum value
Y=Maximum value Y=Minimum value
Z=Maximum value Z=Minimum value
Valid range: 0 to "9999999
NOTE
1 The units are 0.001 mm or 0.0001 inch. Note that the
maximum value must be greater than the minimum value for
each axis.
2 When setting the graphics range with the graphics
parameters for the maximum and minimum values, do not
set the parameters for the magnification and screen center
coordinates afterwards. Only the parameters set last are
effective.
⋅ SCALE
Set the graphic magnification
The setting range is 0 to 10000 (unit:0.01 time).
⋅ GRAPHIC CENTER
X=
Y=
Z=
Set the coordinate value on the workpiece coordinate system at
graphic center.
D Graphics parameter