
9.NOTES ON MOTOR INSTALLATION FANUC AC SPINDLE MOTOR αiT SERIES B-65272EN/04
- 198 -
9.3 CHECKING MOTOR VIBRATION (TO SEE WHETHER
CENTERING IS SUCCESSFUL)
To check whether the spindle is centered with the motor successfully,
measure the vibration acceleration of the motor.
Center the motor shaft with the spindle so that the vibration
acceleration of the motor does not exceed 0.5 G (at maximum speed).
(Frequency range: 10 to 1000 Hz)
Before shipping machines, check that the vibration acceleration is 0.5
G or less for all motors.
Method of motor vibration measurement
Vibration-meter
Pickup
Motor body
(Recommended vibration-meter) Use the following vibration-meter or
an equivalent:
Name: Anavibro
Model: VM-3304
Manufacturer: IMV Corporation (TEL : 03-3262-6311)
Features: Since a pickup of moving-coil (velocity) type is
employed, the need for complicate setting is
eliminated to allow an easy measurement.
The frequency range is 10 to 1000 Hz, so that this
vibration-meter is suitable for measurement of motor
rotation components.
* FANUC does not recommend a charge vibration-meter using a
piezoelectric acceleration type pickup because it requires
complicate setting for use.