
4.NOTES ON INSTALLATION SPECIFICATIONS FOR THE αi SERIES B-65272EN/04
- 30 -
4.5 WHEN A MOTOR IS CONNECTED TO A SPINDLE VIA A
GEAR
CAUTION
1 Do not use a helical gear which applies a load in the motor axial
direction.
2 To prevent unusual gear sounds, apply the following
precautions:
(1) The deviation of the gear tooth surface should indicate the
proper value.
(Tip) Measuring the deviation of a gear tooth surface
(2) The correct backlash should be provided.
(3) The perpendicularity of the motor flange mounting surface
to the machine shaft should indicate the proper value.
3 Mount the motor on the machine so that the vibration
acceleration is 0.5 G or less when it is measured using the
method described in CAUTION 4 of Section 4.1.