B-70265EN/02 APPENDIX E.PARAMTER LIST
- 283 -
#7 #6 #5 #4 #3 #2 #1 #0
15160 MDS MNT
[Data type] Bit
MNT
0: Does not display the laser maintenance screen.
1: Displays the laser maintenance screen.
When the value indicating that the laser maintenance screen is not
displayed is specified, the compensation factor is also stored and the
cumulative operating time is also set. You can display the laser
maintenance screen to check the data when required.
MDS
0: Disables data input on the laser maintenance screen.
1: Enables data input on the laser maintenance screen.
Data input on the laser maintenance screen is disabled to prevent the
end user from entering data such as the operating time unintentionally.
(The data can only be referenced.)
Setting this parameter to 1 enables data input.