NOTE
The host file list (detail) screen shown above is an example
of screen display, and information displayed may vary
according to the specification of the FTP server used with
the host computer.
Display items
The number of files registered in the directory (folder) of the host
computer currently connected is displayed.
The number of the host currently connected is displayed.
List of operations
This operation switches between normal display and detail display.
This operation updates information displayed.
This operation stops [SEARCH] operation.
This operation updates screen information so that a file specified by its
file number is placed at the start of the list.
This operation deletes a file held on the hard disk embedded to the host
computer.
This operation reads a file held on the hard disk embedded to the host
computer to the CNC part program storage. This soft key is displayed
only when 9 is set as the input/output device number of the CNC, and the
CNC is placed in the EDIT mode.
This operation outputs a file held in the CNC part program storage to the
hard disk embedded to the host computer. This soft key is displayed only
when 9 is set as the input/output device number of the CNC, and the CNC
is placed in the EDIT mode.
D Number of registered
program files
D Currently connected
host
D SWITCH
D UPDATE
D STOP
D SEARCH
D DELETE
D READ
D PUNCH
8. EMBEDDED ETHERNET FUNCTION
GFKE-0222-EN
640