The host computer to which the FTP file transfer function attempts to
make a connection as the current communication destination can be
checked.
1 Press the function key
PROG
.
2 Press the continuous menu key at the right end of the soft key display.
3 Press the [CONECT] soft key. The connection host change screen
appears. The Ethernet functions currently available are displayed.
The upper row displays the usable embedded Ethernet function
device.
The embedded port or PCMCIA card is displayed.
The lower row displays the usable Ethernet option boards. When no
option board is installed, no information is displayed.
4 When you press the [EMBEDD] soft key, a list of the connection host
computers specified with the embedded Ethernet port is displayed.
If the usable embedded Ethernet function device is the PCMCIA card,
the [PCMCIA] soft key is displayed instead of the [EMBEDD] soft
key. When you press the [PCMCIA] soft key, a list of the connection
host computers specified with the PCMCIA Ethernet card is
displayed.
8.5.2.7
Checking and changing
of the connection host
Procedure
GFKE-0222-EN
8. EMBEDDED ETHERNET FUNCTION
651