1. CONTROLLED AXES
B–63522EN/02
NC FUNCTION
32
Number of controlled paths : 1–path
Number of controlled axes : Max. 4 axes
Number of simultaneously controlled axes : Max. 4 axes
Number of controlled axes by PMC : Max. 4 axes
T series :
The two basic axes are always set to X and Z. Additional axes can be
selected from A, B, C, U, V, W, and Y freely. For the 2–path control,
the two basic axes are always set to X and Z on each path, and
additional axes can be selected freely from A, B, C, U, V, W, and Y.
NOTE
If U, V, or W is used as an axis name, the G code system
must be either B or C.
M series :
The three basic axes are set to X, Y, and Z. Additional axes can be
selected from A, B, C, U, V, and W freely.
For two–path control, X, Y, and Z are always used as the names of the
three basic axes. Additional axes can be assigned any of A, B, C, U,
V, and W as their names.
1.3
LOADER
CONTROLLED AXES
1.4
AXIS NAMES