B–61804E–2/05
9. NOTES
DOUBLE SIDED MACHINING
377
The tool data used for this function is the same as that of standard system.
The tooling information used for this function is the same as that of
standard system.
If parameter for the double–sided machining function is valid, the
back–sided machining function cannot be performed.
While the double–sided machining function is valid the family program
which has been made using the back–sided machining function cannot be
used.
If this family program is used, define the machining processing newly.
If MTF parameter Nos.1050, 1055 are set to “2–axis lath”, the double
sided machining function can be performed. If these MTF parameter are
“4–axis lath”, this function cannot be used.
The functions described in this part is not available when using
16–TA CAP II, 16–TTA CAP II, 16–TB CAP II, 15–TFB, or
15–TTFB.
9.1
TOOL DATA
9.2
TOOLING
INFORMATION
9.3
RELATION WITH
BACK–SIDE
MACHINING FAPT
9.4
RELATION WITH
4–AXIS LATH