B-65282EN/05 9.CONNECTION
- 211 -
9.3.3.1 Details of cable K2
See Item 9.3.1.2.
9.3.3.2 Details of cable K69
See Item 9.3.1.4.
9.3.3.3 Details of cable K10 (power cable)
For the SPM-2.2i, SPM-5.5i, SPMC-2.2i, and SPMC-5.5i, a connector
(D-5000) is used to attach the SPM motor power cable. For other
models (SPM-11i and higher), a terminal board is used for
connection.
This subsection does not include the dimensions of the crimp terminal
or the shape of the motor-side connector.
Refer to "AC SPINDLE MOTOR αi series Descriptions (B-
65272EN)" for these items.
About the cable specification
Select the cable specification by considering the following conditions
for use.
<1> Motor current rating or current needed in use on a real machine
<2> Cable type (heat resistance temperature, etc.)
<3> Environment in which the cable is installed (operating ambient
temperature, etc.)
<4> Need of water proofing (pay attention to the diameter of the
applicable cable clamp)
<5> Certification for CE marking (compliance with various safety
standards and EMC standard)
<6> Securing insulation space among the cable pins at the time of
cabling