B–63173EN/03
8. CONNECTION TO SETTING AND DISPLAY UNIT
249
The Power Mate is used in conjunction with a stand–alone type PDP, a
stand–alone type MDI, and a picture display type stand–alone type MDI.
CN2 (PDP power
supply)
A02B–0200–C100
J114
Stand–alone type
PDP
FG
Power supply of
24VDC 1.2A
J142
Power Mate
JD41
CN1 (video input)
Soft key
cable
JA1
Stand–alone type
MDI
JD13
JN1
CK2
CPD2
CPD1
J30
Video cable
J53
Device number selec-
tion switch
J47
1 Up to 16 Power Mates can be connected to one stand–alone type PDP
and one stand–alone type MDI.
Connection is the same as for the CRT/MDI.
2 Terminating method is the same as for the CRT/MDI.
3 The stand–alone type PDP is supplied with a soft key cable. Connect this
cable to the stand–alone type MDI. Keep in mind that the length of this
cable is 450 mm when positioning these units. See Appendix A for the
comector position of the soft key cable in stand–alone type CRT.
4 The screen can be shared in the same way as for the CRT/MDI.
5 For details concerning cable J142 used to connect a Power Mate and
the stand–alone type MDI, see Subsection 8.1.2. See Section 8.1.3 for
how to attach the J45 cable for connection with multiple Power Mate
units.
6 For details concerning cable J30 used to connect the power supply to
the stand–alone type MDI, see Subsection 8.1.5.
7 For details concerning cable J47 used to connect the stand–alone type
MDI to the device number selection switch, see Subsection 8.1.4.
8.3
INTERFACE
BETWEEN STAND–
ALONE TYPE PDP,
STAND–ALONE TYPE
MDI, AND Power Mate
8.3.1
Outline