A. EXTERNAL DIMENSIONS OF EACH UNIT
B–63173EN/03
APPENDIX
442
Fig. 19
Punch panel (for 2 channels)
Specification : A02B–0259–C051 (Cable length : 1m)
A02B–0259–C052 (Cable length : 2m)
A02B–0259–C053 (Cable length : 3m)
Mounting hole drilling diagram
Ground pin for the frame ground (M4, length: 200 mm)
A ground pin for the frame ground must be provided
near the punch panel.
Painting is masked around the edge of the sheet metal by 8 mm.
As an EMC measure, when connecting the sheet metal to the
cabinet electrically, painting must also be masked on the cabinet.
Unit : mm
Install the unit from the outside of the cabinet.