
B–61863E–1/06
9. C-PROGRAM MEMORY DISPLAY
AND DEBUG FUNCTION
APPLICATION
PROGRAMMING GUIDE
439
On FS15i, the following C Language Control Screens are provided.
(1) Display of title, parameter and system information of C language
program (TITLE)
(2) Display of status of the user program task execution
(USRDGN)
(3) Display of the GDT information and memory of each segments
(GDT)
(4) Display of memory of each tasks of the user program
(USRMEM)
To display the C language control screen, press soft–key [PMC C LANG]
of NC system screen (function Key [SYSTEM]).
↓
↓
PMC
SYSTEM
PMC
C LANG
TITLE USRDGN GDT USRMEM
NOTE
On FS15i, C language control screen is displayed by
pressing soft–key [PMC C LANG]. But, alarm screen,
setting screen, RUN/STOP operation and so on are
displayed in PMC control screen which is displayed by
pressing soft–key [PMC].
WARNING
C language control screen is used to debug the user
program developed by MTB. If the operations at the screen
are incorrect, there is a possibility that system error occurs
or system hangs up. Please operate with sufficient care
when setting data. When shipping to an end user, please set
bit 1 of keep relay K900 to 0 (GDT screen and USRMEM
screen are not displayed).
9.4
OPERATION OF C
LANGUAGE
CONTROL SCREEN
9.4.1
General of C Language
Control Screen