OPERATION
B–64124EN/01
8. DATA INPUT/OUTPUT
585
Searching for a file
1 Press the EDIT switch on the machine operator’s panel.
2 Press function key
PROG
.
3 Press the rightmost soft key (next–menu key).
4 Press soft key
[CARD]. The screen shown below is displayed.
PROG (OPRT)DIR +
DIRECTORY (M–CARD)
No. FILE NAME SIZE DATE
O0034 N00045
0001 O1000 123456 96/07/10
0002 O1001 118458 96/07/30
0003 O0002 113250 96/07/30
0004 O2000 173456 96/07/31
0005 O2001 113444 96/07/31
0006 O3001 118483 96/08/02
0007 O3300 111406 96/08/05
0008 O3400 112420 96/07/31
0009 O3500 117460 96/07/31
~ ~
5 Press soft key [(OPRT)].
6 Set the number of the desired file number with soft key
[F SRH].
Then, start the search by pressing soft key
[EXEC]. If found, the file is
displayed at the top of the directory screen.
DIRECTORY (M–CARD)
No. FILE NAME COMMENT
O0034 N00045
0019 O1000 (MAIN PROGRAM)
0020 O1010 (SUBPROGRAM–1)
0021 O1020 (COMMENT )
0022 O1030 (COMMENT )
~ ~
When a search is made for file number 19
Procedure
DELETEPUNCHF SRH F READ N READ