B-63343EN/02 USER PROGRAM 4.DATA STRUCTURE OF MACHINING PROGRAM
- 37 -
4.1 DETAILS OF DATA ATTRIBUTE
Macro Variable of each data items = ABCDEFG (numerical value)
1) ABCDEFG = -1
This data item is not used, and it will never displayed on a screen.
Next data item will be displayed on this place.
2) ABCDEFG < 100000
This data item is numerical value type, and will be inputted by
numerical keys. The end figure (G) means the figure number
under decimal point.
3) 200000 > ABCDEFG ≥ 120000
This data item is literal type, and will be inputted by soft-keys.
By pushing soft-key for selecting menu, into corresponding data
variable, sequence number of soft-key comment registered in a
Comment Table Program in advance will be set. As a content of
this data, this soft-key comment will be displayed.
G = 1: Call sub-program for setting data format (O7501 -
O7519) after data inputting
G = 2: Sub-program call (same to G=1) + initialize a process
data window
G = 3: Sub-program call (same to G=1) + initialize a figure data
window
G = 4: Sub-program call (same to G=1) + initialize both process
and data windows
4) 300000 > ABCDEFG ≥ 200000
This data item is numerical value type, and can be inputted by
both soft-keys and numerical keys. In ordinary case, this data
will be used for machine position reading.