B-63343EN/02 USER PROGRAM 4.DATA STRUCTURE OF MACHINING PROGRAM
- 39 -
= 5: Basic Color Palette #5 (D=0, 2, 4, 6)
Extended Color Palette #13 (D=1, 3, 7)
= 6: Basic Color Palette #6 (D=0, 2, 4, 6)
Extended Color Palette #14 (D=1, 3, 7)
= 7: Basic Color Palette #7 (D=0, 2, 4, 6)
Extended Color Palette #15 (D=1, 3, 7)
F = Color of Character Background
= 0: Black (D=0)
Extended Color Palette #8 (D=1, 3, 7)
= 1: Basic Color Palette #1 (D=0, 2, 4, 6)
Extended Color Palette #9 (D=1, 3, 7)
= 2: Basic Color Palette #2 (D=0, 2, 4, 6)
Extended Color Palette #10 (D=1, 3, 7)
= 3: Basic Color Palette #3 (D=0, 2, 4, 6)
Extended Color Palette #11 (D=1, 3, 7)
= 4: Basic Color Palette #4 (D=0, 2, 4, 6)
Extended Color Palette #12 (D=1, 3, 7)
= 5: Basic Color Palette #5 (D=0, 2, 4, 6)
Extended Color Palette #13 (D=1, 3, 7)
= 6: Basic Color Palette #6 (D=0, 2, 4, 6)
Extended Color Palette #14 (D=1, 3, 7)
= 7: Basic Color Palette #7 (D=0, 2, 4, 6)
Extended Color Palette #15 (D=1, 3, 7)
8) ABCDEFG = 1B00000
This data item is especially assigned to Surface Speed / Rotating
Speed.
At the time of B = 0, this data is Surface speed and G96 (Surface
speed constant control) mode is available, and if B = 1, this data
is Spindle rotating speed and G97 mode.
9) ABCDEFF = 1000001
This data item is especially assigned to Coolant ON / OFF, and
can be inputted by soft-key.
10) ABCDEFG = 3000001
This data item is especially assigned to Tool Number.
11) ABCDEFG = 4B0000G
This data item is especially assigned to Feedrate.
At the time of B = 0, this data is Feedrate/rev. and G99 (Feed per
revolution) mode, and if B = 1, this data is Feedrate/min. and
G98 (Feed per minute) mode is used.
The end figure (G) means the figures under decimal point.
12) ABCDEFG = 5B0000G
This data item is especially assigned to Lead of Thread/Number
of Thread.
At the time of B = 0, this data is Lead of Thread, and if B = 1,
this data is Thread Number of Inch type Thread.
The end figure (G) means the figures under decimal point.