
18. SPINDLE FUNCTIONS
B–63443EN/02
PMC INTERFACE
198
When the spindle stop signal turns to “0”, the output voltage becomes 0V
and the spindle enable signal ENB[18.1] turns to “0” (M05 is not output).
When this signal turns to “1”, the analog voltage returns to its original
value and the signal ENB turns to “1”. The time chart shown in Fig.18.3
is an example. The signal conforms with the time chart that satisfies the
spindle amplifier specifications.
Input command
S or S
M03
M05 M04 S0
Miscellaneous function
processing
Spindle stop signal *SSTP
ON
OFF
Spindle enable signal ENB
Analog voltage 0V
Fig.18.3
NOTE
1 When this signal is not used, let the signal be “1”.
2 M03, M04, M05 are not processed inside the CNC.
18.3
SPINDLE STOP
SIGNAL (INPUT)
*SSTP <G029#6>