
B–63443EN/02
5. CONNECTION OF INPUT
POWER SUPPLY
HARDWARE
31
Specifications of a recommended external 24–VDC power supply
(regulated power supply) (The requirements of the UL 1950 standard
must be satisfied.)
Output voltage: Output voltage: 24 VDC (10% (21.6 to 26.4 V)
(Including ripple voltage and noise. See the
figure given below.)
Output current: Continuous load current must be the current
consumption level of the Power Mate and units
or higher.
(At the maximum temperature within the
power magnetics cabinet in which the power
supply is placed)
Load fluctuation (including surge current):
The above output voltage range must not be
exceeded by any load fluctuations due to
external DO and so forth.
Instantaneous AC input disconnection hold time:
10 ms (for –100%)
20 ms (for –50%)
CAUTION
The power supplies for the Power Mate and related units
using 24VDC input must all satisfy the specifications
described here.
5.1
SPECIFICATIONS
AND CIRCUIT
CONFIGURATION OF
EXTERNAL 24–VDC
POWER SUPPLY