1. DISPLAY AND OPERATION
B–63525EN/02
140
This screen displays the system software information of the slave. The
screen is displayed first when the power motion manager function is
selected. This screen is automatically displayed also at the termination
of the function.
1. Press the [SYSTEM] function selection soft key. The following soft
keys are displayed together with the screen displayed when SYSTEM
was last selected. The currently active soft key is displayed in reverse
video.
[ PARAM ][ DGNOS ][ ][SYSTEM][ ]
2. Press the [SYSTEM] soft key again. The system configuration screen
appears. While this screen is displayed, the [SYSTEM] soft key is left
displayed in reverse video.
POWER MOTION MANAGER
SYSTEM CONFIGURATION
1.GROUP0 / β
SYSTEM <SERIES/VERSION> 88A1 01
[ PARAM ][ DGNOS ][ ][ SYSTEM ][ ]
Sample screen: Series and edition of the servo unit β series system list
The parameters necessary for the functions of the slave must be specified
in advance.
1. Press the [SYSTEM] function selection soft key. The following soft
keys appear.
[ PARAM ][ DGNOS ][ ][SYSTEM][ ]
D System configuration
screen
D Parameter screen