B–63525EN/02
5. MATTERS COMMON TO BOTH LCD–MOUNTED TYPE
AND STAND–ALONE TYPE i SERIES (HARDWARE)
369
Setting
position
Meaning of settingIndication
2 2 Set the rotary switch of an expansion module to this
position when the two preceding expansion mod-
ules are skipped.
3 – Setting prohibited
4 to F 4, –, 6, –,
8, –, A, –,
C, –, E, –,
4, 8, or C has the effect of 0.
5, 9, or D has the effect of 1.
6, A, or E has the effect of 2.
7, B, or F has the effect of 3. (← setting prohibited)
Examples of setting
Basic module
Basic module 1
Basic module 2
Basic module 3
Basic module
Basic module 1
Basic module 2
Basic module 3
Basic module
Basic module 1
Basic module 2
Basic module 3
(When expansion module 1 is skipped)
Set the rotary switch of expansion module 2
to setting position = 1. Do not change the
setting (setting position = 0) of expansion
module 3.
(When expansion module 1 and expansion
module 2 are skipped)
Set the rotary switch of expansion module 3
to setting position = 2.
(When expansion module 2 is skipped)
Set the rotary switch of expansion module 3
to setting position = 1. Do not change the
setting (setting position = 0) of expansion
module 1.
This function was not available initially, but was recently added. This
function became available, depending on the type of module, as indicated
below.
Expansion module B (DI/DO =
24/16, without a manual pulse
generator interface)
A03B–0815–C003 Available starting with shipment
in June 1998 and later
Expansion module C (DO = 16,
24A output)
A03B–0815–C004 Available starting with shipment
in August 1998 and later
Expansion module D (analog
input)
A03B–0815–C005 Available starting with shipment
in August 1998 and later