B–63525EN/02
4. STAND–ALONE TYPE i SERIES HARDWARE
307
Item Code
Symbol CAPi T board A20B–8100–0560
JNA
F–BUS backplane
connector
Setting pin TM1
Connector CP8B
Status display of the red LEDs j: Off J: On
CAB Status
jjJ An error occurred in the local bus on this board.
jJj An error occurred in the local bus on this board. Alter-
natively, an error occurred on the main CPU board or
another option board.
jJJ The CPU is not yet started (reset state).(*1)
Jjj A parity alarm occurred in the SRAM.
JjJ A bus error occurred in the CPU on this board.
JJj A parity alarm occurred in the DRAM.
NOTE
1 The LEDs display this pattern because the CPU is in the
reset state immediately after power–up.
2 If the LEDs display any of the patterns, the hardware may
be defective (except in the reset state at power–up).
4.4.7
Symbol CAPi T Board
D Specifications
D Mounting positions of
connectors, LEDs, etc.
D LED display