APPENDIX
B–63304EN/02
B. RESTRICTIONS ON EACH SYSTEM
954
(2)Manual input flag data (Nos.130 – 166, 230 – 266, 330 – 366)
These data will have no meaning unless the machining process is set
in the machining procedure data.
#7 #6 #5 #4 #3
MPP
#2
MCD
#1
MCC
#0
MTS
MTS Set whether or not to perform manual tool selection
1 : Tool selection is done manually.
The automatic proceeding of the tool data question screen will halt, so
tool number must be input manually.
0 : Tool selection is done automatically.
The appropriate tool will be selected from the tooling information.
MCC Set whether or not to manually input cutting conditions.
1 : Cutting conditions are input manually.
The automatic proceeding of cutting conditions question screen will
halt, so input cutting conditions manually.
0 : Cutting conditions are set automatically.
MCD Set whether or not to manually set cutting direction and area.
1 : Cutting direction and area are set manually.
0 : Cutting direction and area are decided automatically.
MPP Set whether or not to input the passing point manually
1 : Automatic processing of the passing point screen will halt, so passing
point can be input manually.
0 : Processings are automatically prepared without the passing point
defined.